Author Index

A

  • A. A., Rizk NATURAL WIND DRIVEN SUSTAINABLE VENTILATION SYSTEM (PROTOTYPE) FOR INDOOR LIVING SPACES [Volume 170, Issue 0, 2021, Pages 184-201]
  • A. Abd Elrahman, Mohammed Nonlinear Finite Element Analysis of Polypropylene Lightweight RC Beams [Volume 173, Issue 0, 2022, Pages 1-15]
  • A. Abdelwahab, Sabreen Application and Performance Measurement of Total Productive Maintenance: Case study of a Food Industries Company in Egypt [Volume 160, Issue 0, 2018, Pages 1-25]
  • A. Abd-Rabboa, M. Heat Transfer From Elliptic Cylinder Immersed In A Fluidized Bed [Volume 166, Issue 0, 2020, Pages 389-405]
  • A , Abdullah, Mariam, New Urbanism Theory as an Approach to regenerate the Egyptian Urban Heritage [Volume 161, Issue 0, 2019, Pages 112-133]
  • A. Aboul Atta, Tarek URBAN POLICIES AS A SMART GROWTH TOOL TO CONTROL THE ENVIRONMENAL IMPACTS OF TRANSPORTATION [Volume 162, Issue 0, 2019, Pages 162-181]
  • A. Aboushal, E. The Future of Architectural Education in Egypt " Architecture Pedagogy Focuses on Educational Concepts and Approaches" [Volume 171, Issue 0, 2021, Pages 301-313]
  • A. Aboushal, E. Developing 3D Geospatial Model using Advanced Surveying System E. A. Aboushal [Volume 172, Issue 0, 2021, Pages 345-354]
  • A. Adam, A. Overall Assessment of an Innovative Coaxial Air-Staged Burner for Cofiring of Oil and Gas [Volume 173, Issue 0, 2022, Pages 316-331]
  • A. Ahdy A, M. Friction and Wear Characteristics of Polymeric Composites Reinforced by Nano Particles and Impregnated with Paraffin Oil [Volume 161, Issue 0, 2019, Pages 1-17]
  • A. Ali, Shaimaa Semi-Active Vibration Control of Train Suspension Using Optimized PID Controller [Volume 181, Issue 0, 2024, Pages 33-51]
  • A. A. Nawar, Mohamed COMPRESSOR ENERGY AND EXERGY ANALYSIS [Volume 168, Issue 0, 2020, Pages 211-226]
  • A. A. Nawar, Mohamed Performance Evaluation of Solar Energy-driven Binary Rankine Cycle under Egyptian Climatic Conditions [Volume 178, Issue 0, 2023, Pages 242-264]
  • A. Attia, Tayseer Finite Element Modeling of Fatigue Life of Steel Wire [Volume 163, Issue 0, 2019, Pages 15-26]
  • A. Awad, Hoda Effect of BFRP Sheets on Strengthening Deep Beams with Openings [Volume 178, Issue 0, 2023, Pages 304-324]
  • Abbas, W. Galerkin Method for Nonlinear Volterra-Fredholm Integro-Differential Equations Based on Chebyshev Polynomials [Volume 170, Issue 0, 2021, Pages 169-183]
  • Abbas, W. Increasing oil temperature and the optimum mass flow rate and weather conditions over the year [Volume 178, Issue 0, 2023, Pages 362-373]
  • Abbas, wael Using the Galerkin method to compute the eigenvalues and eigenelements of the second-order Sturm–Liouville problems [Volume 163, Issue 0, 2019, Pages 27-42]
  • Abbas, Wael Impact of geometric parameters and inlet boundary conditions on the behavior of a cyclone separator [Volume 175, Issue 0, 2022, Pages 96-112]
  • Abbas, Wael Optimization of an Environmentally Sustainable HTL-Free Perovskite Solar Cell using SCAPS-1D [Volume 179, Issue 0, 2023, Pages 116-132]
  • Abdalfatah, Samia Power-Sharing in Microgrids by Adaptive Virtual Impedance and Fuzzy Logic [Volume 179, Issue 0, 2023, Pages 68-74]
  • Abdallah H. Abdelaal, Eman Strength Characteristics Of Lightweight Reinforced Concrete Deep Beams With Web Openings [Volume 166, Issue 0, 2020, Pages 262-283]
  • Abdallah Sayed Ahmed, Ahmed Seasonal Soil Salinity Detection Using Salinity Indices from Landsat 8 Satellite Images in El-Sharqiyah Governorate, Egypt [Volume 178, Issue 0, 2023, Pages 201-211]
  • Abdelalim, A. Space Syntax as a Tool to Enhance the Performance of El-Tahrir Complex Plaza تقنيات تحليل بنية الفراغ كآداه لتحسين أداء ساحة مجمع التحرير [Volume 175, Issue 0, 2022, Pages 262-279]
  • Abdel Aziz, Shady An Investigation of the Factors Affecting the Mechanical Smoke Extraction System for A Building with an Atrium [Volume 177, Issue 0, 2023, Pages 130-144]
  • ABDELAZIZ, HEBA RESPONSIVE BUILDINGS ENVELOPE INTEGRATION IN SUSTAINABLE NEW CITIES PLANNING STRATEGIES [Volume 177, Issue 0, 2023, Pages 145-158]
  • Abdel Aziz Tolbah, Farid A supervised learning technique for programming a welding arm robot using vision system [Volume 162, Issue 0, 2019, Pages 86-101]
  • Abdel - Fattah Abdel - Aziz Mahmoud, Rehab أثر الادارة الحضرية على المدن لمواجهة الازمات دراسة حالة : مدينة ووهان فى مواجهة جائحة كرونا ( كوفيد-19 ) The Impact of Urban Management on Cities to Face Crises Case Study: Wuhan vs. Coronavirus (COVID-19) [Volume 180, Issue 0, 2023, Pages 221-243]
  • Abdel Gawad, Esraa Post-COVID-19 Implemented Guidelines in Urban Spaces: The case of Alexandria, Egypt [Volume 174, Issue 0, 2022, Pages 52-61]
  • Abdelghani Mahmoud, Ahmed Evaluation of Self-Healing Performance of the Hot Mix Asphalt Using Metallic Wool and Recycled Materials [Volume 175, Issue 0, 2022, Pages 1-18]
  • Abdelhady Hammam, Roaa Chemical Treatment of Industrial Wastewater Using Fenton Reaction [Volume 173, Issue 0, 2022, Pages 219-231]
  • Abdel-Hameeda, Hala , Development of one-section microchannels cooling system for high-concentration photovoltaic cells [Volume 164, Issue 0, 2019, Pages 250-270]
  • Abdel_hamid, Mohamed IMPACT OF USING THE NEW THIRD FREQUENCY ON GPS AMBIGUITY RESOLUTION [Volume 166, Issue 0, 2020, Pages 284-295]
  • Abd El-Hamid, M. Performance Investigation of a Photovoltaic Module Integrated with Different Optical Filters [Volume 175, Issue 0, 2022, Pages 137-155]
  • Abdelhamid Eizeldin, Mohamed Study of Morphological Changes for the River Nile in ElDahab Island, Giza Governorate [Volume 180, Issue 0, 2023, Pages 394-404]
  • Abdelkader, amgad An Investigation of the Dependence of 3D Semi-Span Wing Behaviour on the Leading-edge Tubercles Configuration [Volume 175, Issue 0, 2022, Pages 215-236]
  • Abdelkader, Morad DOUBLE-SKIN FACADES IN HEALING ENVIRONMENTS: AN APPROACH FOR ENHANCING DAYLIGHTING PERFORMANCE IN SOUTH-ORIENTED PATIENT ROOMS IN CAIRO, EGYPT [Volume 165, Issue 0, 2020, Pages 96-113]
  • Abdelkader Bashery Abbass, Mahmoud Buildings Energy Prediction Using Artificial Neural Networks [Volume 171, Issue 0, 2021, Pages 106-118]
  • Abdellatif, A. On the use of the NACA0021 and the S1046 blade profiles with a hydro Darrieus turbine under the typical operating conditions of the Nile River [Volume 160, Issue 0, 2018, Pages 44-58]
  • Abdellatif, Ahmed Slenderness Effect for The Composite RC Columns with Steel Angles at The Corners; Experimentally and Analytically [Volume 181, Issue 0, 2024, Pages 141-160]
  • Abdel-Latif Aboul-Atta, Tarek Reclassify logistic zones in a quantitative way [Volume 179, Issue 0, 2023, Pages 232-248]
  • Abdel Mageed Diab, Mohamed Improving Energy Efficiency performance utilizing building envelope design in High standard housing in Egypt [Volume 171, Issue 0, 2021, Pages 330-351]
  • Abd El Mageed Diab, Mohamed Integrated Mobility as an approach to Elevate urban quality )case study of Al Rehab neighbourhood) [Volume 173, Issue 0, 2022, Pages 37-51]
  • Abdelmagied, Mahmoud Thermal performance characteristics of triple-helical tubes heat exchanger with different configurations [Volume 172, Issue 0, 2021, Pages 46-66]
  • Abdelmagied, Mahmoud Enhancement of heat transfer of double tube heat exchanger with inner twisted spiral tube [Volume 172, Issue 0, 2021, Pages 67-84]
  • Abdelmagied,, Mahmoud Heating the air in buildings by evacuated tube solar collector used AL2O3/ water nanofluid at Cairo-Egypt climates [Volume 164, Issue 0, 2019, Pages 229-249]
  • Abdelmonem Elwany, Amanda An approach to improve land use and urban mobility patterns in Egyptian communities (Case study of El-Sheikh Zayed city) [Volume 178, Issue 0, 2023, Pages 446-482]
  • Abd El-Raheim, D. Impact of phase change materials and brick thickness on thermal comfort in free-floating mode [Volume 175, Issue 0, 2022, Pages 386-397]
  • Abd Elrahman, Mohamed Experimental Study on Punching Shear Behavior of Crushed Clay Brick Lightweight Concrete Flat Plate Slabs [Volume 173, Issue 0, 2022, Pages 52-75]
  • Abd-Elsabour Ahmed, Inas A Methodological application of New Techniques for Rationalization Energy Consumption in Buildings [Volume 162, Issue 0, 2019, Pages 138-161]
  • Abd-Elsabour Ahmed, Inas Mathematics Tools and its Efficiency on the Building’s Environmental Performance [Volume 170, Issue 0, 2021, Pages 26-46]
  • Abd-Elsabour Ahmed, Inas The digital transformation toward an integrated design process [Volume 177, Issue 0, 2023, Pages 31-58]
  • AbdElsabour Ahmed, Inas A Methodological Framework for Enhancing the Modern Office Spaces and Solving their Problems [Volume 177, Issue 0, 2023, Pages 79-102]
  • Abdelsalam, M. Investigating the Impact of Tool Type on Optimizing Burnishing Parameters for AISI 1035 Steel: A Taguchi and RSM Approach [Volume 180, Issue 0, 2023, Pages 119-146]
  • Abdel Salam, Esraa Post-COVID-19 Implemented Guidelines in Urban Spaces: The case of Alexandria, Egypt [Volume 174, Issue 0, 2022, Pages 52-61]
  • Abdel-Salam, Mazen Estimation of photovoltaic module parameters based on datasheet: A review and a proposed method [Volume 179, Issue 0, 2023, Pages 178-203]
  • Abdelsalam Mohamed, Haitham INTERIOR MORPHOLOGY AND THE RESPONSE OF SPACE PERCEIVERS [Volume 172, Issue 0, 2021, Pages 308-328]
  • Abd El Samed, Naglaa Application and Performance Measurement of Total Productive Maintenance: Case study of a Food Industries Company in Egypt [Volume 160, Issue 0, 2018, Pages 1-25]
  • Abdelsamie, A. Improving the cooling performance of a data center: impact of unit arrangement and CFD setups [Volume 168, Issue 0, 2020, Pages 117-145]
  • Abdelsamie, Abouelmagd Numerical Investigation of Smoke Extraction Methods in Large Storage Areas: Design Modifications [Volume 169, Issue 0, 2021, Pages 235-265]
  • Abdelsamie, Abouelmagd Numerical investigation of particle spray size distribution in turbulent jet flow [Volume 174, Issue 0, 2022, Pages 262-284]
  • Abdelsamie, Abouelmagd Impact of geometric parameters and inlet boundary conditions on the behavior of a cyclone separator [Volume 175, Issue 0, 2022, Pages 96-112]
  • Abdelsamie, Abouelmagd An Investigation of the Dependence of 3D Semi-Span Wing Behaviour on the Leading-edge Tubercles Configuration [Volume 175, Issue 0, 2022, Pages 215-236]
  • Abdelsamie, Abouelmagd Abdelsamie Impact of the jet velocity on the turbulent liquid jet [Volume 179, Issue 0, 2023, Pages 249-273]
  • Abdelwahed, Khaled Hybrid Abrasive Electrochemical Grinding Machining of alloy steel K110 [Volume 163, Issue 0, 2019, Pages 294-308]
  • Abdelwahed Mekhamar, Ahmed KINETIC FACADES: HOW NATURE OF COMPONENTS AFFECTS THE APPLICATIONS OF DIFFERENT TRANSFORMATION STRATEGIES [Volume 170, Issue 0, 2021, Pages 11-25]
  • Abdelwahed Mekhamar, Ahmed BRIEF OVERVIEW OF CLIMATE RESPONSIVE FACADES & ITS KINETIC APPLICATIONS [Volume 171, Issue 0, 2021, Pages 16-34]
  • Abdullaha, Mohamed Bluff Body Impact on Harvested Heat Transfer from Heated Plate [Volume 171, Issue 0, 2021, Pages 166-178]
  • Abelsamie, Abouelmagd Improvement of Regenerative Pump Performance by Using Blade with Combined Angles Modification [Volume 174, Issue 0, 2022, Pages 172-190]
  • Abo Elfetouh Elsayed Khalifa, Marwa THE FEASABILITY OF LAND READJUSTMENT FOR INFORMAL AREAS’ UPGRADING STRATEGIES IN EGYPT. [Volume 163, Issue 0, 2019, Pages 106-129]
  • Abo El-Naga, Islam Using Metakaolin Material As Additive For Hot Asphalt Mixtures [Volume 177, Issue 0, 2023, Pages 203-211]
  • Abouelfadl, Hebatalla Interpretation and Presentation of Urban Archeology Kom El-Dikka Archeological site in view of Principle 1 of ENAME Charter [Volume 174, Issue 0, 2022, Pages 208-225]
  • Abou-Ziyan, H. Impact of phase change materials and brick thickness on thermal comfort in free-floating mode [Volume 175, Issue 0, 2022, Pages 386-397]
  • Abou-Ziyana,, Hosny Development of one-section microchannels cooling system for high-concentration photovoltaic cells [Volume 164, Issue 0, 2019, Pages 250-270]
  • Abozaid Abobakr Abdelghanya, Tarek COMPRESSOR ENERGY AND EXERGY ANALYSIS [Volume 168, Issue 0, 2020, Pages 211-226]
  • Abu Sari Muhammed Haroun, Seham Contextual Design for New Additions in Historical Complexes (Cairo University Campus) [Volume 176, Issue 0, 2022, Pages 220-247]
  • Adeeb, Hala Morphing in Form Finding Stage through the Architectural Design Process [Volume 165, Issue 0, 2020, Pages 114-132]
  • Adeeb, Hala Fragmenting Techniques through Form Finding Process Towards New Architectural Form [Volume 166, Issue 0, 2020, Pages 105-118]
  • Adeeb Fahmy Hanna, Hala Definition of the Building Envelope: Towards a New Perspective [Volume 165, Issue 0, 2020, Pages 33-56]
  • Adel Hanafey, Menna-tallah Alternative architecture as a new approach to achieve energy efficiency “Guiding bio-mimicry in architectural design” [Volume 167, Issue 0, 2020, Pages 34-51]
  • Adel Ismail, Ahmed Smart Building: Application of Intelligent Concept Through Upgrading Strategy and A Responsive Approach as A Catalyst of Change to Smart Integration Concept [Volume 163, Issue 0, 2019, Pages 59-79]
  • Adel Ismail, Ahmed Smart Eco Home: Towards Sustainable Community Within Relevant Strategic Integrated Intelligence of Architecture. [Volume 163, Issue 0, 2019, Pages 80-105]
  • Adel Rifaat, Abeer Latest Street Food Vending Organization Attempts in Cairo: An Evaluation of the “Street 306” Model [Volume 173, Issue 0, 2022, Pages 16-36]
  • Adel Salama, Mohamed التحول الرقمى للعمران كمدخل للتنمية العمرانية المستدامة للمدن الجديدة المستقبلية فى مصر Digital Transformation of Urbanization as an Approach to Sustainable Urban Development for Future New Cities in Egypt [Volume 175, Issue 0, 2022, Pages 319-335]
  • Adel Salama, Mohamed انعكاسات االعتبارات االنسانية فى تخطيط المدن على جودة الحياة فى المدن الجديدة دراسة حالة: مدينة القاهرة الجديدة Reflection of Human Considerations in Urban Planning on Quality of Life in New Cities Case Study: New Cairo City [Volume 177, Issue 0, 2023, Pages 393-415]
  • Adel Yousef, Marin تطبيقات کفاءة المياه للعمارة و العمران في نظم التقييم البيئي العالمية والمحلية Water Efficiency Applications for Architecture and Urbanism in International and Local Environmental Assessment Systems [Volume 164, Issue 0, 2019, Pages 49-67]
  • A. Ebrahim, Fatma Punching Shear Behavior of Interior Slab-Column Connections Reinforced with Vertical Bolts [Volume 162, Issue 0, 2019, Pages 15-31]
  • A. E. Halawa, Mohamed Effect of treated wastewater on properties of high strength concrete mixture [Volume 173, Issue 0, 2022, Pages 376-390]
  • A. Elfar, Abdullah A Literature Review of Power Station Systems Maintenance Performance [Volume 174, Issue 0, 2022, Pages 318-328]
  • A. Elnawawy, Mohamed Pneumatic Modular System as Adaptive Skin to Enhance Daylighting and energy efficiency in Workspace [Volume 178, Issue 0, 2023, Pages 322-321]
  • A. Elnawawy, Mohamed  Appling ETFE Material as Pneumatic Modular Cushions in Workspace's Fascade For Saving Energy [Volume 179, Issue 0, 2023, Pages 204-231]
  • A. El-Sayed, T. Free vibration analysis for a pipe conveying fluid with intermediate support and carrying multiple concentrated masses [Volume 160, Issue 0, 2018, Pages 26-43]
  • A. Emara, A. CFD Modelling of CH4/Air Flames Characteristics Issuing from a Two-Slot EV-Burner [Volume 176, Issue 0, 2022, Pages 171-184]
  • A. Emara, K. Experimental Investigation of Stability and Structure of Vertical LPG Inverse Diffusion Flames Issuing from an Elliptic Burner [Volume 171, Issue 0, 2021, Pages 119-137]
  • A, Fadda, Nesma Downtown Pedestrian mall as a Strategy to Enhance the Egyptian Street Life [Volume 163, Issue 0, 2019, Pages 43-58]
  • A. Fikry, Ahmed The Thermal comfort for Excavated cliff buildings:Taba, Egypt as a case study [Volume 160, Issue 0, 2018, Pages 139-158]
  • A. F. Taher, Gehad Experimental Analysis of the Contact Phenomenon in a Simulated Drill-string [Volume 180, Issue 0, 2023, Pages 1-13]
  • A. Gamal, M. STUDYING THE CHANGE OF SOIL RESONANCE PROPERTIES DUE TO BURRIED ROOM IN THE SUBSURFACE [Volume 171, Issue 0, 2021, Pages 151-165]
  • A. Ghaleb, Ahmed PERFORMANCE BASED SEISMIC ASSESSMENT OF BUILDINGS WITH CURVED SHEAR WALLS [Volume 164, Issue 0, 2019, Pages 178-192]
  • A. Gomaa, M. DEVELOPMENT AND TESTING OF ELECTRO HYDRAULIC WAVE ENERGY SIMULATOR [Volume 169, Issue 0, 2021, Pages 196-216]
  • A.Hafiz, A. Improvement of Regenerative Pump Performance by Using Blade with Combined Angles Modification [Volume 174, Issue 0, 2022, Pages 172-190]
  • A. Haggag, Hesham PERFORMANCE OF COUPLING BEAMS WITH OPENINGS EXPOSED TO CYCLIC LOADING [Volume 168, Issue 0, 2020, Pages 191-210]
  • A. Hammad, N. Weight optimization of fixed landing gear for medium range UAV [Volume 161, Issue 0, 2019, Pages 18-36]
  • A. Harb, abd el nenam Numerical Study for Enhancement of Concentrator Photovoltaic (CPV) Cells Efficiency [Volume 163, Issue 0, 2019, Pages 309-342]
  • A. Harba, abd el nomam Numerical Study for Concentrated Photovoltaic Performance at Low Concentration Ratio [Volume 163, Issue 0, 2019, Pages 343-366]
  • A. Hassan, Hala Finite Element Modeling of Fatigue Life of Steel Wire [Volume 163, Issue 0, 2019, Pages 15-26]
  • Ahmad Ibrahim Massoud, Osama The Effects of Reuse Marble Waste on Hollow Concrete Blocks in Constructions [Volume 160, Issue 0, 2018, Pages 192-205]
  • Ahmed Aboushal, Esraa Restoration and Development of Urban Heritage Sites (Rehabilitation of Middle cities and Heritage towns) [Volume 167, Issue 0, 2020, Pages 52-74]
  • Ahmed Aboushal, Esraa Inclusion of Sustainability Concepts in Architectural Education The Current and Expected Situation in Egypt [Volume 175, Issue 0, 2022, Pages 336-351]
  • Ahmed Haggag, Hesham Behavior of Prestressing Bars in Reinforced Concrete Columns as Transverse Reinforcement [Volume 175, Issue 0, 2022, Pages 19-36]
  • Ahmed Hassan, Hassan Alternative architecture as a new approach to achieve energy efficiency “Guiding bio-mimicry in architectural design” [Volume 167, Issue 0, 2020, Pages 34-51]
  • Ahmed Ismail, Mostafa NUMERICAL STUDY ON THE OPTIMIZATION OF SMOKE VENTILATION IN A SITUATION OF A TRAIN FIRE AT A SUBWAY STATION [Volume 166, Issue 0, 2020, Pages 350-365]
  • Ahmed Mahmoud Mansour, Sohair Chemical Treatment of Industrial Wastewater Using Fenton Reaction [Volume 173, Issue 0, 2022, Pages 219-231]
  • Ahmed Mustafa, Mohamed A Literature Review of Power Station Systems Maintenance Performance [Volume 174, Issue 0, 2022, Pages 318-328]
  • Ahmed Reda Hamed, Mohamed Integrated Performance Evaluation Indicators for Water Supply Systems [Volume 174, Issue 0, 2022, Pages 22-37]
  • Ahmed Shalaby, Heidi Historic Cairo's Boundaries: Analysis and Evaluation [Volume 173, Issue 0, 2022, Pages 488-507]
  • Ahmed Shalaby, Heidi 3D Laser Scanner as a Tool of Documentation for the Heritage Gardens [Volume 174, Issue 0, 2022, Pages 370-384]
  • A. Ibrahim, A. Rotary Machines Fault Diagnosis based on Principal Component Analysis [Volume 171, Issue 0, 2021, Pages 138-150]
  • A. Ibrahim, A. Investigating the Impact of Tool Type on Optimizing Burnishing Parameters for AISI 1035 Steel: A Taguchi and RSM Approach [Volume 180, Issue 0, 2023, Pages 119-146]
  • A. Ibrahim, M. Numerical Investigation of a Desiccant Packed Bed Performance [Volume 169, Issue 0, 2021, Pages 266-279]
  • A, Kamel, Basil Downtown Pedestrian mall as a Strategy to Enhance the Egyptian Street Life [Volume 163, Issue 0, 2019, Pages 43-58]
  • Alaa Mandour, M Creating healthy spaces indicators [Volume 169, Issue 0, 2021, Pages 1-15]
  • Alaa Mandour, M Healthy urban space ratios through Environmental and Human Aspects [Volume 169, Issue 0, 2021, Pages 16-29]
  • Alaa Mandour, Mohamed Morphing in Form Finding Stage through the Architectural Design Process [Volume 165, Issue 0, 2020, Pages 114-132]
  • Alaa Mandour, Mohamed Fragmenting Techniques through Form Finding Process Towards New Architectural Form [Volume 166, Issue 0, 2020, Pages 105-118]
  • Alaa Mandour, Mohamed Applying innovative criteria to achieve Biomimicry in Architecture [Volume 176, Issue 0, 2022, Pages 90-109]
  • Alaa Mandour, Mohamed A Methodological Framework for Enhancing the Modern Office Spaces and Solving their Problems [Volume 177, Issue 0, 2023, Pages 79-102]
  • Alaa Mandour, Mohamed A New Urban Approach To Achieve Clean Smart Cities [Volume 177, Issue 0, 2023, Pages 103-115]
  • Alaa Mandour, Mohammed, The development of the principles of the Elements of Islamic architectural by using parametric algorithms [Volume 170, Issue 0, 2021, Pages 104-122]
  • Alaa Mandour, Mohammed, The Revival of Islamic Architecture using Parametric Algorithms [Volume 170, Issue 0, 2021, Pages 123-146]
  • Al Hussein Mohamed Tohlop, Ahmed The Role of Sustainable Environmental Design in Enhancing the Efficiency of Healthcare Buildings in Egypt [Volume 180, Issue 0, 2023, Pages 14-38]
  • Ali, Amr Effect of Different Reinforced Type on RC Beams [Volume 167, Issue 0, 2020, Pages 244-256]
  • Ali, Reda IMPACT OF USING THE NEW THIRD FREQUENCY ON GPS AMBIGUITY RESOLUTION [Volume 166, Issue 0, 2020, Pages 284-295]
  • Ali Attia, Mahmoud The behavior of underground conduits buried in soil [Volume 181, Issue 0, 2024, Pages 106-140]
  • Ali Hussein Mohamed, Nada Applying innovative criteria to achieve Biomimicry in Architecture [Volume 176, Issue 0, 2022, Pages 90-109]
  • Ali Mohamed, Hind Hidden architecture with epidemics in Egypt Case-study on Execution designs curriculum at the Higher Institute of Engineering at 5th settlement [Volume 173, Issue 0, 2022, Pages 453-477]
  • Ali Mohamed, Nahla Assessment and Prediction Planning of R.C Structures Using BIM Technology [Volume 167, Issue 0, 2020, Pages 394-403]
  • AlKady, Mahmoud Increasing oil temperature and the optimum mass flow rate and weather conditions over the year [Volume 178, Issue 0, 2023, Pages 362-373]
  • Al-Shafaey, Noha DOUBLE-SKIN FACADES IN HEALING ENVIRONMENTS: AN APPROACH FOR ENHANCING DAYLIGHTING PERFORMANCE IN SOUTH-ORIENTED PATIENT ROOMS IN CAIRO, EGYPT [Volume 165, Issue 0, 2020, Pages 96-113]
  • Al-Sheikh, Saeed Effect of treated wastewater on properties of high strength concrete mixture [Volume 173, Issue 0, 2022, Pages 376-390]
  • Aly Ibrahim, Ashraf The Effect of Night Ventilation on Covered Sports Halls Energy Conservation [Volume 176, Issue 0, 2022, Pages 185-196]
  • A. M. A, Hesham Galerkin Method for Nonlinear Volterra-Fredholm Integro-Differential Equations Based on Chebyshev Polynomials [Volume 170, Issue 0, 2021, Pages 169-183]
  • A. Mahgoub, A. Experimental Investigation of Stability and Structure of Vertical LPG Inverse Diffusion Flames Issuing from an Elliptic Burner [Volume 171, Issue 0, 2021, Pages 119-137]
  • A. Mahmoud, Ahmed Nonlinear Finite Element Analysis of Polypropylene Lightweight RC Beams [Volume 173, Issue 0, 2022, Pages 1-15]
  • A. Mahmoud, Ahmed Resistance of Punching Shear Strength of RC Flat Slabs According to Laboratory and Finite Element Analysis Study Comparison of International Codes [Volume 174, Issue 0, 2022, Pages 285-305]
  • A. Mandour, Mohamed Pneumatic Modular System as Adaptive Skin to Enhance Daylighting and energy efficiency in Workspace [Volume 178, Issue 0, 2023, Pages 322-321]
  • A. Mandour, Mohamed Appling ETFE Material as Pneumatic Modular Cushions in Workspace's Fascade For Saving Energy [Volume 179, Issue 0, 2023, Pages 204-231]
  • Amer, Fathy Development of QPSK Demodulator using DSP Techniques [Volume 163, Issue 0, 2019, Pages 1-14]
  • A. M. Morsy, Mohamed Performance Evaluation of Solar Energy-driven Binary Rankine Cycle under Egyptian Climatic Conditions [Volume 178, Issue 0, 2023, Pages 242-264]
  • A. Mohamed, Maii Airport site suitability and development based on multiCriteria in Egypt [Volume 176, Issue 0, 2022, Pages 197-219]
  • A. Mohammada, M. Heat Transfer From Elliptic Cylinder Immersed In A Fluidized Bed [Volume 166, Issue 0, 2020, Pages 389-405]
  • A. Moneib, H. Overall Assessment of an Innovative Coaxial Air-Staged Burner for Cofiring of Oil and Gas [Volume 173, Issue 0, 2022, Pages 316-331]
  • A. Moneib, H. CFD Modelling of CH4/Air Flames Characteristics Issuing from a Two-Slot EV-Burner [Volume 176, Issue 0, 2022, Pages 171-184]
  • A. Moneim, Manal Interaction between Surface Water and Groundwater in Experimental Site Close to Damietta Branch, Egypt. [Volume 177, Issue 0, 2023, Pages 17-30]
  • A. Mouneer, Tarek Experimental Investigation and CFD modelling for Indoor Air Thermal Conditions in Worship Buildings in Egypt: Church and Masjid [Volume 175, Issue 0, 2022, Pages 398-341]
  • A. M. Said, Ahmed Numerical Investigation of a Desiccant Packed Bed Performance [Volume 169, Issue 0, 2021, Pages 266-279]
  • A. M. Saidb,, Ahmed Using the Galerkin method to compute the eigenvalues and eigenelements of the second-order Sturm–Liouville problems [Volume 163, Issue 0, 2019, Pages 27-42]
  • A. Osman, Fawzy Effective Home Automation Using Android and Embedded System [Volume 166, Issue 0, 2020, Pages 1-14]
  • A. Osman, Fawzy Low-Cost Design and Implementation of Cloud SCADA System [Volume 166, Issue 0, 2020, Pages 15-29]
  • A. Osman, Mostafa Effect of BFRP Sheets on Strengthening Deep Beams with Openings [Volume 178, Issue 0, 2023, Pages 304-324]
  • A. Osman, T. Friction and Wear Characteristics of Polymeric Composites Reinforced by Nano Particles and Impregnated with Paraffin Oil [Volume 161, Issue 0, 2019, Pages 1-17]
  • A. Ragheb, Ghada Residents’ Attitudes Toward Supporting the Heritage Sites Using the Structural Equation Modeling (Sem), Case Study: Mansoura Culture Palace, Egypt. [Volume 174, Issue 0, 2022, Pages 149-171]
  • A. Ragheb, Riham Sustainable Touristic path toward cultural identity [Volume 167, Issue 0, 2020, Pages 404-420]
  • A. Raslan, Rania Enhancing Urban Spaces through Crowd Behavior Analysis A Case Study of Arafat to Muzdalifah Road During Hajj Time [Volume 179, Issue 0, 2023, Pages 100-115]
  • A. R. Eltokhy, Mostafa Effective Home Automation Using Android and Embedded System [Volume 166, Issue 0, 2020, Pages 1-14]
  • A. R. Eltokhy, Mostafa Low-Cost Design and Implementation of Cloud SCADA System [Volume 166, Issue 0, 2020, Pages 15-29]
  • A.R.Naga, Soheir Experimental Study of the Feasibility of Friction Stir Spot Welding in Polyethylene [Volume 161, Issue 0, 2019, Pages 37-54]
  • A. Sayed, Emad Using An accelerated Technique of The Laplace-Adomian Decomposition Method in Solving A class of Non-linear Integro-differential Equations [Volume 175, Issue 0, 2022, Pages 371-385]
  • A.shaheen,, M Estimation of thermal characteristics for solar parabolic trough collector in selected locations in Egypt". [Volume 164, Issue 0, 2019, Pages 271-293]
  • A. Shahein, M. Overall Assessment of an Innovative Coaxial Air-Staged Burner for Cofiring of Oil and Gas [Volume 173, Issue 0, 2022, Pages 316-331]
  • A. Shalaby, Heidi The Khedivial Cairo Revitalization Project A case study from Kaser El-Nail Street [Volume 174, Issue 0, 2022, Pages 62-82]
  • Ashraf Abdelfattah, Ahmed Analysis of Optimum Performance of Air Vessels Used in Damping Water Hammer Pressure Wave [Volume 167, Issue 0, 2020, Pages 275-292]
  • Ashraf Hashim, Eyad The Effect of Night Ventilation on Covered Sports Halls Energy Conservation [Volume 176, Issue 0, 2022, Pages 185-196]
  • Atef Abdelaziz Ahmed Atta, Asmaa THE FEASABILITY OF LAND READJUSTMENT FOR INFORMAL AREAS’ UPGRADING STRATEGIES IN EGYPT. [Volume 163, Issue 0, 2019, Pages 106-129]
  • Atef El Dessoqy Fagga, Ahmed l Double Skin Green Facade in Workplace for Enhancing Thermal Performance in Greater Cairo [Volume 168, Issue 0, 2020, Pages 1-12]
  • Atef El Dessoqy Faggal, Ahmed Argumentation for Impact of Indoor Environmental Quality on Users’ Performance: Online Self-assessment Questionnaire. [Volume 160, Issue 0, 2018, Pages 159-172]
  • Atef El Dessoqy Faggal, Ahmed Conventional and Advanced Glazing Technologies for Enhancing Thermal and Lighting Performance [Volume 171, Issue 0, 2021, Pages 1-15]
  • Atef Mohamed El Tohamy, Nada Argumentation for Impact of Indoor Environmental Quality on Users’ Performance: Online Self-assessment Questionnaire. [Volume 160, Issue 0, 2018, Pages 159-172]
  • Atef Muhammed Hussien, Eng. Muhammed Behavior of Prestressing Bars in Reinforced Concrete Columns as Transverse Reinforcement [Volume 175, Issue 0, 2022, Pages 19-36]
  • Awad, Hilmy Power-Sharing in Microgrids by Adaptive Virtual Impedance and Fuzzy Logic [Volume 179, Issue 0, 2023, Pages 68-74]
  • Ayman El.Deeb, Donia The Use of Green Design Strategies for Achieving Thermal Comfort (Applying PMV as a Measurement Tool) [Volume 171, Issue 0, 2021, Pages 35-46]

B

  • Baker, Hussam A Critical Review of Quality Assessment Tools for Public Spaces [Volume 177, Issue 0, 2023, Pages 255-274]
  • Baker, Hussam Improving Quality of Student’s Life on University Campus (Guidelines of New Assessment Tools) [Volume 178, Issue 0, 2023, Pages 429-445]
  • Bakr Khalil, Husam Biomimicry inspired Adaptive Building Envelope in hot climate [Volume 166, Issue 0, 2020, Pages 30-47]
  • Bakr Khalil, Husam Sustainable Optimization for thermal comfort and building energy efficiency in Cairo [Volume 166, Issue 0, 2020, Pages 48-65]
  • Baligh Boulos Ghobrial, Sylvia A New Urban Approach To Achieve Clean Smart Cities [Volume 177, Issue 0, 2023, Pages 103-115]
  • B. Anwar, M. BEHAVIOUR OF PILES SUBJECTED TO LATERAL FORCES IN COHESIVE SOIL [Volume 171, Issue 0, 2021, Pages 260-268]
  • B. Anwar, Mona, Behaviour of Contiguous Piles Group with Different Pile Diameters in Sandy Soil under Vertical Loading [Volume 172, Issue 0, 2021, Pages 412-423]
  • B. El-Shabasy, Adel Finite Element Modeling of Fatigue Life of Steel Wire [Volume 163, Issue 0, 2019, Pages 15-26]
  • B.khalifa, Doaa Experimental Study of the Feasibility of Friction Stir Spot Welding in Polyethylene [Volume 161, Issue 0, 2019, Pages 37-54]
  • B. Saad, Nourhan Thermal Enhancement of Parabolic Trough Collectors using Absorber Tubes with Internally longitudinal Round Edge Fins [Volume 173, Issue 0, 2022, Pages 356-375]

D

  • Darwish, Rania FPGA BASED BEVEL GEARBOX FAULT DIAGNOSIS APPROACH [Volume 160, Issue 0, 2018, Pages 59-78]
  • Dewidar, K. THE PHILOSOPHY OF PARADIGM SHIFT ACROSS THE HISTORY OF ARCHITECTURAL PRACTICES [Volume 172, Issue 0, 2021, Pages 190-211]

E

  • E. A. Mostafa, Abdelzaher Evaluation of Self-Healing Performance of the Hot Mix Asphalt Using Metallic Wool and Recycled Materials [Volume 175, Issue 0, 2022, Pages 1-18]
  • Ebrahiem Ebrahiem, Esraa Creating healthy spaces indicators [Volume 169, Issue 0, 2021, Pages 1-15]
  • Ebrahiem Ebrahiem, Esraa Healthy urban space ratios through Environmental and Human Aspects [Volume 169, Issue 0, 2021, Pages 16-29]
  • E. El-kholy, E. Power-Sharing in Microgrids by Adaptive Virtual Impedance and Fuzzy Logic [Volume 179, Issue 0, 2023, Pages 68-74]
  • E. El-Metwally, Salah SHRINKAGE AND THERMAL EFFECTS IN R/C FLAT PLATE AND RAFT FOUNDATION [Volume 163, Issue 0, 2019, Pages 234-256]
  • E. El-Metwally, Salah DESIGN OF REINFORCED CONCRETE LEDGE BEAMS - SAFETY AND ECONOMY [Volume 166, Issue 0, 2020, Pages 242-261]
  • E. El-Metwally, Salah Damaged Orthotropic Failure Surface for Masonry Walls [Volume 162, Issue 0, 2019, Pages 32-50]
  • E. El-Metwally, Salah Performance of Exterior Beam-Column Joints with U-Shaped Bars for Different Stirrups Detailing: Numerical Study [Volume 172, Issue 0, 2021, Pages 131-150]
  • E. El-Metwally, Salah Experimental Study on Punching Shear Behavior of Crushed Clay Brick Lightweight Concrete Flat Plate Slabs [Volume 173, Issue 0, 2022, Pages 52-75]
  • E. El-zoghiby, Mohamed Strength Characteristics Of Lightweight Reinforced Concrete Deep Beams With Web Openings [Volume 166, Issue 0, 2020, Pages 262-283]
  • E. El-Zoughiby, Mohamed SHRINKAGE AND THERMAL EFFECTS IN R/C FLAT PLATE AND RAFT FOUNDATION [Volume 163, Issue 0, 2019, Pages 234-256]
  • E. El-Zoughiby, Mohamed PERFORMANCE BASED SEISMIC ASSESSMENT OF BUILDINGS WITH CURVED SHEAR WALLS [Volume 164, Issue 0, 2019, Pages 178-192]
  • E. El-Zoughiby, Mohamed Nonlinear Finite Element Analysis of Polypropylene Lightweight RC Beams [Volume 173, Issue 0, 2022, Pages 1-15]
  • Eid. Ragab, Ragab Application and Performance Measurement of Total Productive Maintenance: Case study of a Food Industries Company in Egypt [Volume 160, Issue 0, 2018, Pages 1-25]
  • El-Ashmawy, Rasha Residents’ Attitudes Toward Supporting the Heritage Sites Using the Structural Equation Modeling (Sem), Case Study: Mansoura Culture Palace, Egypt. [Volume 174, Issue 0, 2022, Pages 149-171]
  • El-Assal, Ahmed Hybrid Abrasive Electrochemical Grinding Machining of alloy steel K110 [Volume 163, Issue 0, 2019, Pages 294-308]
  • El-Desouky, A. Evaluation of Pavement Surface Conditions for Luxor International Airport [Volume 162, Issue 0, 2019, Pages 1-14]
  • El Din M. Omar, Mohie Compatibility of Water Resources System in Egypt to Future Climate Change Projections, Case Study Qena Governorate - Upper Egypt [Volume 170, Issue 0, 2021, Pages 150-168]
  • ElFeky, Karim Increasing oil temperature and the optimum mass flow rate and weather conditions over the year [Volume 178, Issue 0, 2023, Pages 362-373]
  • ElFiki, Sherif Teachers’ Interpretation of “Learning through Landscapes” in Egyptian School Grounds [Volume 168, Issue 0, 2020, Pages 325-342]
  • Elgendy, E. Performance Enhancement of an Integrated Solar Combined Cycle with Multi-Stage Flash Desalination Cycle as Bottoming Cycle [Volume 165, Issue 0, 2020, Pages 232-250]
  • Elgendy, E. An improved desiccant evaporative cooling system, parametric analysis, and system comparison [Volume 166, Issue 0, 2020, Pages 366-388]
  • Elgendy, E. Optimization of Heat Source Temperature for Single and Double Effect Vapor Absorption Refrigeration System [Volume 162, Issue 0, 2019, Pages 68-85]
  • Elgendy, E. Performance evaluation of a solar adsorption cooling system under Mediterranean climatic conditions for cold stores applications [Volume 174, Issue 0, 2022, Pages 226-243]
  • Elgendy, E. Performance Investigation of a Photovoltaic Module Integrated with Different Optical Filters [Volume 175, Issue 0, 2022, Pages 137-155]
  • Elgendy, E. Performance Evaluation of Solar Energy-driven Binary Rankine Cycle under Egyptian Climatic Conditions [Volume 178, Issue 0, 2023, Pages 242-264]
  • El-kareim Shoeib, Ata Characteristics of lightweight concrete with different admixtures [Volume 169, Issue 0, 2021, Pages 173-195]
  • El-Menshawi, Wafik Reshaping Patient Approach to health facilities throughout and beyond Pandemics: Redesigning entrances and waiting areas [Volume 174, Issue 0, 2022, Pages 38-51]
  • El Messeidy, Rania Application of Biophilic Patterns in Health Care Environments to Enhance Healing [Volume 163, Issue 0, 2019, Pages 130-143]
  • El Messeidy, Rania Architecture and City Branding: Role of Iconic buildings [Volume 163, Issue 0, 2019, Pages 144-155]
  • El Messeidy, Rania Adapting Shipping Containers as Temporary Shelters in Terms of Recycling, Sustainability and Green Architecture. Reuse as Accommodation in Egypt. [Volume 160, Issue 0, 2018, Pages 173-191]
  • Elnekhaily, Fatma Effectiveness of High Energy Efficiency to Minimize Energy Consumption for Residential Buildings in Egypt [Volume 165, Issue 0, 2020, Pages 78-95]
  • El-Razaz, Zeinab Biomimicry inspired Adaptive Building Envelope in hot climate [Volume 166, Issue 0, 2020, Pages 30-47]
  • El-Razaz, Zeinab Sustainable Optimization for thermal comfort and building energy efficiency in Cairo [Volume 166, Issue 0, 2020, Pages 48-65]
  • El-Razaz, Zeinab VISION OF THE IDEAL PRISON DESIGN ACCORDING TO THE HUMAN RIGHTS CONSIDERATIONS [Volume 166, Issue 0, 2020, Pages 66-82]
  • El-Razaz, Zeinab ANALYTICAL STUDY FOR THE PRISON DESIGN IN EGYPT ACCORDING TO HUMAN RIGHTS ORGANIZATION CONSIDERATIONS [Volume 166, Issue 0, 2020, Pages 83-104]
  • Elsaied Mostafa, Akram Using Metakaolin Material As Additive For Hot Asphalt Mixtures [Volume 177, Issue 0, 2023, Pages 203-211]
  • Elsamanty, M. Rotary Machines Fault Diagnosis based on Principal Component Analysis [Volume 171, Issue 0, 2021, Pages 138-150]
  • Elsamanty, Mahmoud Elsamanty Investigating the Impact of Tool Type on Optimizing Burnishing Parameters for AISI 1035 Steel: A Taguchi and RSM Approach [Volume 180, Issue 0, 2023, Pages 119-146]
  • Elsayed, Khairy Numerical Study for Enhancement of Concentrator Photovoltaic (CPV) Cells Efficiency [Volume 163, Issue 0, 2019, Pages 309-342]
  • Elsayed, Khairy Simulation-Based Optimization of Smart Building Energy Using Artificial Neural Network [Volume 165, Issue 0, 2020, Pages 210-231]
  • Elsayed, Khairy Studying the effect of vortex finder eccentricity on the gas cyclone performance [Volume 161, Issue 0, 2019, Pages 55-80]
  • Elsayed, Khairy CFD STUDY OF THE EFFECT OF ADDITIONAL INNER BLADES ON SAVONIUS ROTOR PERFORMANCE [Volume 167, Issue 0, 2020, Pages 293-304]
  • Elsayed, Khairy An Investigation of the Dependence of 3D Semi-Span Wing Behaviour on the Leading-edge Tubercles Configuration [Volume 175, Issue 0, 2022, Pages 215-236]
  • Elsayed, Khairy Effect of Radiant Surface Combined with Displacement Ventilation in Office Building in Egypt [Volume 177, Issue 0, 2023, Pages 231-254]
  • Elsayed Ahmed Shakra, Khadiga The Effects of Reuse Marble Waste on Hollow Concrete Blocks in Constructions [Volume 160, Issue 0, 2018, Pages 192-205]
  • Elsayedb, Khairy Numerical Study for Concentrated Photovoltaic Performance at Low Concentration Ratio [Volume 163, Issue 0, 2019, Pages 343-366]
  • El Sayed Mohamed Abdel Naby, Mohamed Study of Morphological Changes for the River Nile in ElDahab Island, Giza Governorate [Volume 180, Issue 0, 2023, Pages 394-404]
  • Elsemary, Yasmin An approach to improve land use and urban mobility patterns in Egyptian communities (Case study of El-Sheikh Zayed city) [Volume 178, Issue 0, 2023, Pages 446-482]
  • El-shabrawy, Ashraf وأثره على تنفيذ مشروعات التشييد تطبيق نظام إدارة الجوده Applying Quality Management System and Effect on Execution of Construction Projects [Volume 166, Issue 0, 2020, Pages 296-319]
  • ELSHAFEI, MOHAMED RESPONSIVE BUILDINGS ENVELOPE INTEGRATION IN SUSTAINABLE NEW CITIES PLANNING STRATEGIES [Volume 177, Issue 0, 2023, Pages 145-158]
  • Elshahat Elmenshawy, Ahmed Historic Cairo's Boundaries: Analysis and Evaluation [Volume 173, Issue 0, 2022, Pages 488-507]
  • El-sharkawi, Ali IMPACT OF USING THE NEW THIRD FREQUENCY ON GPS AMBIGUITY RESOLUTION [Volume 166, Issue 0, 2020, Pages 284-295]
  • Elsoudany, Moemen Parametric Mashrabiya as a Shading System for Optimized Daylighting in Egypt [Volume 177, Issue 0, 2023, Pages 212-230]
  • El-Tawwab, Ali Effect of n-butanol/diesel blends on performance, emission, noise and vibration characteristics of a diesel engine generator [Volume 163, Issue 0, 2019, Pages 203-217]
  • Eltokhy, Mustafa Development of QPSK Demodulator using DSP Techniques [Volume 163, Issue 0, 2019, Pages 1-14]
  • Elzalik, M. INC-MPPT Algorithm for Maximizing Energy Conversion Efficiency of Thermoelectric Generating System [Volume 162, Issue 0, 2019, Pages 102-118]
  • Emad, Marwa Hidden architecture with epidemics in Egypt Case-study on Execution designs curriculum at the Higher Institute of Engineering at 5th settlement [Volume 173, Issue 0, 2022, Pages 453-477]
  • Emad, Marwa A conceptual framework on applying BAPV systems to existing educational buildings Case Study: The Higher Institute of Engineering and Technology-Fifth Settlement [Volume 174, Issue 0, 2022, Pages 191-207]
  • Emad, Marwa Enhancing Walkability in pedestrian oriented gated communities Case Study: Arabia’s Gated Community-New Cairo City [Volume 175, Issue 0, 2022, Pages 73-95]
  • E. Madbouly, S. Performance Investigation of a Photovoltaic Module Integrated with Different Optical Filters [Volume 175, Issue 0, 2022, Pages 137-155]
  • Emad Fikry, Marwa سبل إعادة استخدام حاويات الشحن كإحدى طرق تصميم منشآت معمارية تجارية ضمن مفهوم االستدامة Ways to reuse shipping containers as one of the ways of designing commercial architectural installations within the concept of sustainability [Volume 178, Issue 0, 2023, Pages 106-127]
  • E. Mahmoud, O. DEVELOPMENT AND TESTING OF ELECTRO HYDRAULIC WAVE ENERGY SIMULATOR [Volume 169, Issue 0, 2021, Pages 196-216]
  • E. Mahmoud, Osama Adaptive Neuro-Fuzzy control of Autonomous Ground Vehicle (AGV) based on Machine Vision [Volume 163, Issue 0, 2019, Pages 218-233]
  • Emam Soliman, Radwa VISION OF THE IDEAL PRISON DESIGN ACCORDING TO THE HUMAN RIGHTS CONSIDERATIONS [Volume 166, Issue 0, 2020, Pages 66-82]
  • Emam Soliman, Radwa ANALYTICAL STUDY FOR THE PRISON DESIGN IN EGYPT ACCORDING TO HUMAN RIGHTS ORGANIZATION CONSIDERATIONS [Volume 166, Issue 0, 2020, Pages 83-104]
  • Emara, Kareem Bluff Body Impact on Harvested Heat Transfer from Heated Plate [Volume 171, Issue 0, 2021, Pages 166-178]
  • Emara, Kareem Comparative study of landfill gases generation Via bioreactor and traditional design for maximizing the power generation [Volume 175, Issue 0, 2022, Pages 237-261]
  • Emara, Kareem Impact of the jet velocity on the turbulent liquid jet [Volume 179, Issue 0, 2023, Pages 249-273]
  • E. Sadek, Lamiaa Performance of Concrete Cylinders Confined with Carbon Fiber Reinforced Polymers under Axial Load [Volume 178, Issue 0, 2023, Pages 35-54]
  • E. Taha, Taha Durability performance of silica fume Self-Compacting Concrete [Volume 164, Issue 0, 2019, Pages 193-213]
  • E. Zein, Sondos Investigating Bio-Inspired Approaches for Designing Psycho-Oncological Support Units in Egypt [Volume 173, Issue 0, 2022, Pages 442-452]
  • Ezz, Ahmed Effect of Using Local Hematite aggregate on concrete mechanical properties and Radiation Shielding [Volume 176, Issue 0, 2022, Pages 110-123]
  • Ezzeldeen Ahmed Mostafa, Abdelzaher Development of Sustainable Asphalt Pavement Mixture Using Recycled concrete aggregate, Crumb Rubber and Waste Engine Oil [Volume 180, Issue 0, 2023, Pages 39-58]

F

  • F. Abo-Dagher, Rania Performance of Concrete Cylinders Confined with Carbon Fiber Reinforced Polymers under Axial Load [Volume 178, Issue 0, 2023, Pages 35-54]
  • Fahim Fahmy Asal, Fahmy Comparative Analysis of the Digital Terrain Models Created from Ground Surveying Measurements with the Use of Different Ordinary Kriging Models [Volume 180, Issue 0, 2023, Pages 329-243]
  • Fahmy Sedrak, Momtaz Studying the effect of vortex finder eccentricity on the gas cyclone performance [Volume 161, Issue 0, 2019, Pages 55-80]
  • Faiez Maher Bassily, Eman الحفاظ على العمارة الواحاتية بالمجتمعات الصحراويه "دراسة حالة منخفض الباويطي الواحات البحرية" Preservation of the Oasis Architecture in Desert Communities "A case study of Al-Bawiti Low Surface, Bahariya Oasis" [Volume 173, Issue 0, 2022, Pages 111-130]
  • Faiez Maher Bassily, Eman تحديات الإرتقاء والتطوير العمراني بالمناطق العشوائية "الإيجابيات والسلبيات منطقة "حي شبرا مصر" Upgrading and Urban Development Challenges in Slum Areas “The Pros and Cons of Shubra Misr district” [Volume 176, Issue 0, 2022, Pages 29-48]
  • F Al-Dousari, Abdelhadi تحسين البيئة الداخلية وجودة الأداء البيئي للمباني السکنية بمدينة مکة المکرمة من خلال تقييم کفاءة الواجهات المتحرکة [Volume 173, Issue 0, 2022, Pages 198-218]
  • Farag, Ahmed The behavior of underground conduits buried in soil [Volume 181, Issue 0, 2024, Pages 106-140]
  • Farag, Mamdouh Pneumatic Modular System as Adaptive Skin to Enhance Daylighting and energy efficiency in Workspace [Volume 178, Issue 0, 2023, Pages 322-321]
  • Farag, Mamdouh Appling ETFE Material as Pneumatic Modular Cushions in Workspace's Fascade For Saving Energy [Volume 179, Issue 0, 2023, Pages 204-231]
  • Farahat, Hassan Adaptive Neuro-Fuzzy control of Autonomous Ground Vehicle (AGV) based on Machine Vision [Volume 163, Issue 0, 2019, Pages 218-233]
  • Farid, Sameh Adaptive Neuro-Fuzzy control of Autonomous Ground Vehicle (AGV) based on Machine Vision [Volume 163, Issue 0, 2019, Pages 218-233]
  • Faried, Ayman Alternative care sites for surge capacity during pandemics [Volume 176, Issue 0, 2022, Pages 304-329]
  • Farouk, H. Space Syntax as a Tool to Enhance the Performance of El-Tahrir Complex Plaza تقنيات تحليل بنية الفراغ كآداه لتحسين أداء ساحة مجمع التحرير [Volume 175, Issue 0, 2022, Pages 262-279]
  • Farouk Abdul Baky, Heba تقييم سلوک المستخدمين کمدخل في تحقيق التنمية للفراغات العمرانية [Volume 161, Issue 0, 2019, Pages 190-204]
  • Fathalla, S. Evaluation of Pavement Surface Conditions for Luxor International Airport [Volume 162, Issue 0, 2019, Pages 1-14]
  • Fathi Eid, Ali Assessing The Impact of Stakeholders’ Interaction on The Efficiency of Managing Risk in Construction Projects A Literature Review [Volume 173, Issue 0, 2022, Pages 299-315]
  • Fathy, Ahmed Reshaping Patient Approach to health facilities throughout and beyond Pandemics: Redesigning entrances and waiting areas [Volume 174, Issue 0, 2022, Pages 38-51]
  • Fathy, Fatma Identifying Retrofit Technology to Improve Building Energy Performance: A Review [Volume 178, Issue 0, 2023, Pages 174-200]
  • Fathy, Mohamed Using the Galerkin method to compute the eigenvalues and eigenelements of the second-order Sturm–Liouville problems [Volume 163, Issue 0, 2019, Pages 27-42]
  • Fathy, Mohamed Galerkin Method for Nonlinear Volterra-Fredholm Integro-Differential Equations Based on Chebyshev Polynomials [Volume 170, Issue 0, 2021, Pages 169-183]
  • Fatouh, M. Performance evaluation of a solar absorption air conditioning system under arid climatic conditions [Volume 169, Issue 0, 2021, Pages 217-234]
  • Fatouh, M. Thermal Enhancement of Parabolic Trough Collectors using Absorber Tubes with Internally longitudinal Round Edge Fins [Volume 173, Issue 0, 2022, Pages 356-375]
  • Fatouh, M. Impact of phase change materials and brick thickness on thermal comfort in free-floating mode [Volume 175, Issue 0, 2022, Pages 386-397]
  • Fatouh, Mohamed Implementing the Net Zero Energy Building “nZEB” Strategies on an Existing Administration Building in Egypt [Volume 168, Issue 0, 2020, Pages 146-171]
  • Fatouha, M. Assessment of energy saving in residential buildings using energy efficiency measures under Cairo climatic conditions [Volume 166, Issue 0, 2020, Pages 320-349]
  • Fawzey, Sara BEHAVIOR OF LOAD BEARING WALL FABRICATED FROM LIMESTONE [Volume 168, Issue 0, 2020, Pages 172-190]
  • Fawzy Abdulsalam, Omnia Implications of urban space aspect ratio on campus outdoor thermal comfort ( Case study, BUE campus, Cairo, Egypt) [Volume 170, Issue 0, 2021, Pages 1-10]
  • Fedawy, M. Optimization of an Environmentally Sustainable HTL-Free Perovskite Solar Cell using SCAPS-1D [Volume 179, Issue 0, 2023, Pages 116-132]
  • F. El-Nagar, Amira A Literature Review of Power Station Systems Maintenance Performance [Volume 174, Issue 0, 2022, Pages 318-328]
  • F. H. Habeb, Hanna Resistance of Punching Shear Strength of RC Flat Slabs According to Laboratory and Finite Element Analysis Study Comparison of International Codes [Volume 174, Issue 0, 2022, Pages 285-305]
  • Fikry, Ahmed Characteristics of lightweight concrete with different admixtures [Volume 169, Issue 0, 2021, Pages 173-195]
  • F. Muhammad, Akram The Impact of Surface Treatments on the Architectural Formation of Green Buildings "Comparative Study of some Contemporary Global Models" [Volume 170, Issue 0, 2021, Pages 50-77]
  • Fouad, Mahmoud Evaluation of Self-Healing Performance of the Hot Mix Asphalt Using Metallic Wool and Recycled Materials [Volume 175, Issue 0, 2022, Pages 1-18]
  • F. Saudy, Naglaa Optimization of passive transit signal priority for El-Raml tram, Alexandria, Egypt [Volume 177, Issue 0, 2023, Pages 1-16]
  • F.Tawhed, W. Effect of Using Local Hematite aggregate on concrete mechanical properties and Radiation Shielding [Volume 176, Issue 0, 2022, Pages 110-123]
  • F. Younes, M. Study on the Dynamic Performance of a Modified Tuned Liquid Column Damper [Volume 161, Issue 0, 2019, Pages 81-95]
  • F. Youssef, Waleed Investigating the Impact of Tool Type on Optimizing Burnishing Parameters for AISI 1035 Steel: A Taguchi and RSM Approach [Volume 180, Issue 0, 2023, Pages 119-146]

G

  • G. Abdellah, Amr Damaged Orthotropic Failure Surface for Masonry Walls [Volume 162, Issue 0, 2019, Pages 32-50]
  • Gaber, Basma Parametric Mashrabiya as a Shading System for Optimized Daylighting in Egypt [Volume 177, Issue 0, 2023, Pages 212-230]
  • Galal, M. Optimization of Heat Source Temperature for Single and Double Effect Vapor Absorption Refrigeration System [Volume 162, Issue 0, 2019, Pages 68-85]
  • Gamal, Yehia Thermal performance characteristics of triple-helical tubes heat exchanger with different configurations [Volume 172, Issue 0, 2021, Pages 46-66]
  • Gamal Sherif, Alaa Assessment and Prediction Planning of R.C Structures Using BIM Technology [Volume 167, Issue 0, 2020, Pages 394-403]
  • Gamal Sherif, Alaa Behavior of Prestressing Bars in Reinforced Concrete Columns as Transverse Reinforcement [Volume 175, Issue 0, 2022, Pages 19-36]
  • George Mikhael, Maged Inclusion of Sustainability Concepts in Architectural Education The Current and Expected Situation in Egypt [Volume 175, Issue 0, 2022, Pages 336-351]
  • G.Gado, Nevine Artificial Intelligence in Architecture: Integration into Architectural Design Process [Volume 181, Issue 0, 2024, Pages 1-16]
  • Ghany M. Abdel Ghany, Abdel Ghany Semi-Active Vibration Control of Train Suspension Using Optimized PID Controller [Volume 181, Issue 0, 2024, Pages 33-51]
  • G. Hassan, Heba Compatibility of Water Resources System in Egypt to Future Climate Change Projections, Case Study Qena Governorate - Upper Egypt [Volume 170, Issue 0, 2021, Pages 150-168]
  • Gheith, Nora Alternative care sites for surge capacity during pandemics [Volume 176, Issue 0, 2022, Pages 304-329]
  • Ghoneim, E. STUDYING THE CHANGE OF SOIL RESONANCE PROPERTIES DUE TO BURRIED ROOM IN THE SUBSURFACE [Volume 171, Issue 0, 2021, Pages 151-165]
  • Gomaa, Abdalla Experimental Investigation of Low GWP Refrigerants Applied to Split Air Conditioner [Volume 162, Issue 0, 2019, Pages 51-67]
  • Gomaa, Abdalla Thermal performance characteristics of triple-helical tubes heat exchanger with different configurations [Volume 172, Issue 0, 2021, Pages 46-66]
  • Gomaa, Abdalla Enhancement of heat transfer of double tube heat exchanger with inner twisted spiral tube [Volume 172, Issue 0, 2021, Pages 67-84]
  • Gomaa,, Abdalla Heating the air in buildings by evacuated tube solar collector used AL2O3/ water nanofluid at Cairo-Egypt climates [Volume 164, Issue 0, 2019, Pages 229-249]
  • G. Rabie, Mohamed SYSTEM IDENTIFICATION AND SLIDING MODE TRACKING CONTROL FOR ELECTRO-HYDRAULIC STEER-BY-WIRE SYSTEM [Volume 172, Issue 0, 2021, Pages 121-130]
  • G.Shehata, E. INC-MPPT Algorithm for Maximizing Energy Conversion Efficiency of Thermoelectric Generating System [Volume 162, Issue 0, 2019, Pages 102-118]
  • G.Sherif, Alaa. Effect of Using Local Hematite aggregate on concrete mechanical properties and Radiation Shielding [Volume 176, Issue 0, 2022, Pages 110-123]
  • G. Sherif, Alaa Resistance of Punching Shear Strength of RC Flat Slabs According to Laboratory and Finite Element Analysis Study Comparison of International Codes [Volume 174, Issue 0, 2022, Pages 285-305]

H

  • H, Sadek Experimental Study on Polymeric materials Suppressing Fires Using Low Pressure Water Mist System [Volume 160, Issue 0, 2018, Pages 105-119]
  • H. Abdelraheem, Ahmed Durability performance of silica fume Self-Compacting Concrete [Volume 164, Issue 0, 2019, Pages 193-213]
  • H.Agamy, Mohamed Characteristics of lightweight concrete with different admixtures [Volume 169, Issue 0, 2021, Pages 173-195]
  • Hakima, Mohamed Hybrid Abrasive Electrochemical Grinding Machining of alloy steel K110 [Volume 163, Issue 0, 2019, Pages 294-308]
  • Haleem Hussien, Ahmed Implications of urban space aspect ratio on campus outdoor thermal comfort ( Case study, BUE campus, Cairo, Egypt) [Volume 170, Issue 0, 2021, Pages 1-10]
  • Haleem Hussien Abdel Aziz, Ahmed Improving Energy Efficiency performance utilizing building envelope design in High standard housing in Egypt [Volume 171, Issue 0, 2021, Pages 330-351]
  • H. Ali, Ahmed Slenderness Effect for The Composite RC Columns with Steel Angles at The Corners; Experimentally and Analytically [Volume 181, Issue 0, 2024, Pages 141-160]
  • Halim Hussein, Ahmed KINETIC FACADES: HOW NATURE OF COMPONENTS AFFECTS THE APPLICATIONS OF DIFFERENT TRANSFORMATION STRATEGIES [Volume 170, Issue 0, 2021, Pages 11-25]
  • Halim Hussein, Ahmed BRIEF OVERVIEW OF CLIMATE RESPONSIVE FACADES & ITS KINETIC APPLICATIONS [Volume 171, Issue 0, 2021, Pages 16-34]
  • H Aly, M. DEVELOPMENT AND TESTING OF ELECTRO HYDRAULIC WAVE ENERGY SIMULATOR [Volume 169, Issue 0, 2021, Pages 196-216]
  • H. Aly, Mohamed SYSTEM IDENTIFICATION AND SLIDING MODE TRACKING CONTROL FOR ELECTRO-HYDRAULIC STEER-BY-WIRE SYSTEM [Volume 172, Issue 0, 2021, Pages 121-130]
  • H. Aly, Mohamed Experimental Investigation and CFD modelling for Indoor Air Thermal Conditions in Worship Buildings in Egypt: Church and Masjid [Volume 175, Issue 0, 2022, Pages 398-341]
  • H.A. Mattar, Abdelgawad Fault diagnosis of rolling element bearing based on the empirical wavelet transform technique and correlation coefficient [Volume 180, Issue 0, 2023, Pages 147-160]
  • Hamdy, Mohamed Buildings Energy Prediction Using Artificial Neural Networks [Volume 171, Issue 0, 2021, Pages 106-118]
  • Hamdy, Mohamed Effect of Radiant Surface Combined with Displacement Ventilation in Office Building in Egypt [Volume 177, Issue 0, 2023, Pages 231-254]
  • Hamdy Fouad, Ahmed The Effect of Night Ventilation on Covered Sports Halls Energy Conservation [Volume 176, Issue 0, 2022, Pages 185-196]
  • Hamdy Ghith, Hatem Assessment and Prediction Planning of R.C Structures Using BIM Technology [Volume 167, Issue 0, 2020, Pages 394-403]
  • Hamedo, Neveen FLASH FLOOD MANAGEMENT IN ARID REGION: A CASE STUDY URBAN BANI WASIL VILLAGE, SOHAG GOVERNORATE [Volume 169, Issue 0, 2021, Pages 130-146]
  • Hammad, Amal The behavior of underground conduits buried in soil [Volume 181, Issue 0, 2024, Pages 106-140]
  • H. A. Mohamed, Mostafa Airport site suitability and development based on multiCriteria in Egypt [Volume 176, Issue 0, 2022, Pages 197-219]
  • H. A. Mohamed, Mostafa Seasonal Soil Salinity Detection Using Salinity Indices from Landsat 8 Satellite Images in El-Sharqiyah Governorate, Egypt [Volume 178, Issue 0, 2023, Pages 201-211]
  • Hanafi, Abdalla Increasing oil temperature and the optimum mass flow rate and weather conditions over the year [Volume 178, Issue 0, 2023, Pages 362-373]
  • Hassan, Ahmed Effect of Flange Openings on T-Section Beams Performance [Volume 167, Issue 0, 2020, Pages 237-243]
  • Hassan, Ahmed Effect of Different Reinforced Type on RC Beams [Volume 167, Issue 0, 2020, Pages 244-256]
  • Hassanaina, M. Performance evaluation of a solar adsorption cooling system under Mediterranean climatic conditions for cold stores applications [Volume 174, Issue 0, 2022, Pages 226-243]
  • H. Dadoura, H. Experimental Study for Enhancement the Cooling System and Exhaust Gasses for Gasoline Automotive Engine Using Nano-Fluid. [Volume 161, Issue 0, 2019, Pages 96-111]
  • H. El-Barambali, Hussam The Impact of Surface Treatments on the Architectural Formation of Green Buildings "Comparative Study of some Contemporary Global Models" [Volume 170, Issue 0, 2021, Pages 50-77]
  • H. El-Mongy, Heba Experimental Analysis of the Contact Phenomenon in a Simulated Drill-string [Volume 180, Issue 0, 2023, Pages 1-13]
  • H. El-Mongy, Heba Fault diagnosis of rolling element bearing based on the empirical wavelet transform technique and correlation coefficient [Volume 180, Issue 0, 2023, Pages 147-160]
  • Helmy, Shimaa Studying the effect of vortex finder eccentricity on the gas cyclone performance [Volume 161, Issue 0, 2019, Pages 55-80]
  • Helmy, Walid Effect of n-butanol/diesel blends on performance, emission, noise and vibration characteristics of a diesel engine generator [Volume 163, Issue 0, 2019, Pages 203-217]
  • H. El-Naqeeb, Mohamed Performance of Exterior Beam-Column Joints with U-Shaped Bars for Different Stirrups Detailing: Numerical Study [Volume 172, Issue 0, 2021, Pages 131-150]
  • H. Farghaly, S. Free vibration analysis for a pipe conveying fluid with intermediate support and carrying multiple concentrated masses [Volume 160, Issue 0, 2018, Pages 26-43]
  • H. Hasan, Mohamed A Literature Review of Power Station Systems Maintenance Performance [Volume 174, Issue 0, 2022, Pages 318-328]
  • H. Hedia, Mohammed DESIGN OF REINFORCED CONCRETE LEDGE BEAMS - SAFETY AND ECONOMY [Volume 166, Issue 0, 2020, Pages 242-261]
  • H. Ibrahim, A. CONSTRUCTION PROJECTS’ CLASSIFIED PERFORMANCE INDICATORS (CPIs) [Volume 171, Issue 0, 2021, Pages 179-198]
  • H. Mathana, Mohamed Punching Shear Behavior of Interior Slab-Column Connections Reinforced with Vertical Bolts [Volume 162, Issue 0, 2019, Pages 15-31]
  • H. Mohamed, H. CONSTRUCTION PROJECTS’ CLASSIFIED PERFORMANCE INDICATORS (CPIs) [Volume 171, Issue 0, 2021, Pages 179-198]
  • Hosni Mohamed Ali, Mohamed A supervised learning technique for programming a welding arm robot using vision system [Volume 162, Issue 0, 2019, Pages 86-101]
  • Hossiny, Mohamed Experimental Study on Punching Shear Behavior of Crushed Clay Brick Lightweight Concrete Flat Plate Slabs [Volume 173, Issue 0, 2022, Pages 52-75]
  • H. Rashwan, Mahmoud Using An accelerated Technique of The Laplace-Adomian Decomposition Method in Solving A class of Non-linear Integro-differential Equations [Volume 175, Issue 0, 2022, Pages 371-385]
  • H.Shehata, Gamal Application and Performance Measurement of Total Productive Maintenance: Case study of a Food Industries Company in Egypt [Volume 160, Issue 0, 2018, Pages 1-25]
  • Hussein Hanafy Azam, Radwa Applying Urban Livability indicators in gated communities [Volume 174, Issue 0, 2022, Pages 355-369]
  • Hussein Hassan, Mohammed Multi response optimization of quality characteristics in Offset printing industry using Taguchi approach and Grey relational analysis [Volume 172, Issue 0, 2021, Pages 295-307]
  • Hussein Issa, Hanady Optimization of an Environmentally Sustainable HTL-Free Perovskite Solar Cell using SCAPS-1D [Volume 179, Issue 0, 2023, Pages 116-132]
  • H. Zaki, Shaimaa Biomimicry as an Approach to Create Architectural Resilient Projects [Volume 179, Issue 0, 2023, Pages 158-177]

I

  • I. Ahmed, Shaaban Investigating the Impact of Magnetic Fields and Pulsating Pressure on Non-Newtonian Fluid Flow in Symmetric/Asymmetric Corrugated Microchannels [Volume 179, Issue 0, 2023, Pages 43-67]
  • Ibrahim, Mohammed , Development of one-section microchannels cooling system for high-concentration photovoltaic cells [Volume 164, Issue 0, 2019, Pages 250-270]
  • Ibrahim, Wael BEHAVIOR OF LOAD BEARING WALL FABRICATED FROM LIMESTONE [Volume 168, Issue 0, 2020, Pages 172-190]
  • Ibrahim, Wael THE FLEXURAL BEHAVIOR OF CORRODED OFFSHORE RC BEAMS REPAIRED BY DIFFERENT TECHNIQUES [Volume 169, Issue 0, 2021, Pages 147-158]
  • Ibrahim Esmail, Sobhy Biomimicry inspired Adaptive Building Envelope in hot climate [Volume 166, Issue 0, 2020, Pages 30-47]
  • Ibrahim Esmail, Sobhy Sustainable Optimization for thermal comfort and building energy efficiency in Cairo [Volume 166, Issue 0, 2020, Pages 48-65]
  • Ibrahim Mohammed Abdel Hady, Mohammed The Effects of Reuse Marble Waste on Hollow Concrete Blocks in Constructions [Volume 160, Issue 0, 2018, Pages 192-205]
  • I. ELshaer, Y. Weight optimization of fixed landing gear for medium range UAV [Volume 161, Issue 0, 2019, Pages 18-36]
  • I. Hassan Ali, Mohamed. Comparative study of landfill gases generation Via bioreactor and traditional design for maximizing the power generation [Volume 175, Issue 0, 2022, Pages 237-261]
  • I. I., El-Darwish NATURAL WIND DRIVEN SUSTAINABLE VENTILATION SYSTEM (PROTOTYPE) FOR INDOOR LIVING SPACES [Volume 170, Issue 0, 2021, Pages 184-201]
  • I. Mosa, Ahmed Optimization of passive transit signal priority for El-Raml tram, Alexandria, Egypt [Volume 177, Issue 0, 2023, Pages 1-16]
  • I. Radwan, Momen Heating the air in buildings by evacuated tube solar collector used AL2O3/ water nanofluid at Cairo-Egypt climates [Volume 164, Issue 0, 2019, Pages 229-249]
  • Ismail, Mostafa An Investigation of the Factors Affecting the Mechanical Smoke Extraction System for A Building with an Atrium [Volume 177, Issue 0, 2023, Pages 130-144]
  • Ismail Hassan Soliman, Sarah Morphing in Form Finding Stage through the Architectural Design Process [Volume 165, Issue 0, 2020, Pages 114-132]
  • Ismail Hassan Soliman, Sarah Fragmenting Techniques through Form Finding Process Towards New Architectural Form [Volume 166, Issue 0, 2020, Pages 105-118]

J

  • Jamal Salem Alharthi, Walaa Blockchain Technology and the Future of Construction Industry in the Arab region :Applications, Challenges, and Future Opportunities [Volume 173, Issue 0, 2022, Pages 411-441]

K

  • Kamal, Marwa Pneumatic Modular System as Adaptive Skin to Enhance Daylighting and energy efficiency in Workspace [Volume 178, Issue 0, 2023, Pages 322-321]
  • Kamal, Marwa Appling ETFE Material as Pneumatic Modular Cushions in Workspace's Fascade For Saving Energy [Volume 179, Issue 0, 2023, Pages 204-231]
  • Kamal, Mohamed Combustion Characteristics of Coal-Oil-Water Slurry in Furnaces [Volume 160, Issue 0, 2018, Pages 120-138]
  • Kamal, Reham Estimation of photovoltaic module parameters based on datasheet: A review and a proposed method [Volume 179, Issue 0, 2023, Pages 178-203]
  • Kamal Fahmy, Marwa Parametric Mashrabiya as a Shading System for Optimized Daylighting in Egypt [Volume 177, Issue 0, 2023, Pages 212-230]
  • Kamal Kandil, Aly EGYPTIAN NEO-PHARAONIC ARCHITECTURE 1922-1932: A NATIONALISTIC EXPRESSIVE TOO [Volume 180, Issue 0, 2023, Pages 318-328]
  • Kamal Kandil, Aly THE IMPACT OF EUROPEANIZATION ON THE URBAN AND ARCHITECTURAL STYLISTIC EVOLUTION OF CAIRO DURING THE FIRST HALF OF THE 19TH CENTURY [Volume 181, Issue 0, 2024, Pages 17-32]
  • Kamel, S. THE PHILOSOPHY OF PARADIGM SHIFT ACROSS THE HISTORY OF ARCHITECTURAL PRACTICES [Volume 172, Issue 0, 2021, Pages 190-211]
  • Kaytbay, Saleh Application and Performance Measurement of Total Productive Maintenance: Case study of a Food Industries Company in Egypt [Volume 160, Issue 0, 2018, Pages 1-25]
  • Khairallah, Fouad Effect of Flange Openings on T-Section Beams Performance [Volume 167, Issue 0, 2020, Pages 237-243]
  • Khaled, Asmaa Experimental Investigation of Low GWP Refrigerants Applied to Split Air Conditioner [Volume 162, Issue 0, 2019, Pages 51-67]
  • Khaled Mostafa, Mohamed FLASH FLOOD MANAGEMENT IN ARID REGION: A CASE STUDY URBAN BANI WASIL VILLAGE, SOHAG GOVERNORATE [Volume 169, Issue 0, 2021, Pages 130-146]
  • Khalil, Nesreen Improve Implementing Mega Building Envelope upon arriving material using lean six sigma: case study [Volume 169, Issue 0, 2021, Pages 30-50]
  • Khalil, Nesreen Analytical study of the causes of material waste in implementing the construction envelopes in Egypt [Volume 169, Issue 0, 2021, Pages 51-65]
  • Khalilb, Mohamed تطبيقات کفاءة المياه للعمارة و العمران في نظم التقييم البيئي العالمية والمحلية Water Efficiency Applications for Architecture and Urbanism in International and Local Environmental Assessment Systems [Volume 164, Issue 0, 2019, Pages 49-67]
  • K. Hassan, Doaa Investigating Bio-Inspired Approaches for Designing Psycho-Oncological Support Units in Egypt [Volume 173, Issue 0, 2022, Pages 442-452]
  • Khodeir, Laila Identifying the gap between practical and educational fields in the Egyptian AEC industry in the age of digitalization [Volume 176, Issue 0, 2022, Pages 281-303]
  • K, Kandil, Aly Downtown Pedestrian mall as a Strategy to Enhance the Egyptian Street Life [Volume 163, Issue 0, 2019, Pages 43-58]
  • Kotb, Ashraf Acoustic diagnosis of cavitation for centrifugal pumps of different materials. [Volume 164, Issue 0, 2019, Pages 214-228]
  • Kotb, Mostafa وأثره على تنفيذ مشروعات التشييد تطبيق نظام إدارة الجوده Applying Quality Management System and Effect on Execution of Construction Projects [Volume 166, Issue 0, 2020, Pages 296-319]
  • K. Youne, Younes Fault diagnosis of rolling element bearing based on the empirical wavelet transform technique and correlation coefficient [Volume 180, Issue 0, 2023, Pages 147-160]

L

  • Lasheen, Robba Identifying the gap between practical and educational fields in the Egyptian AEC industry in the age of digitalization [Volume 176, Issue 0, 2022, Pages 281-303]
  • L. El-Kalla, I. Solution of a class of nonlinear differential equations using an accelerated version of Adomian decomposition method [Volume 167, Issue 0, 2020, Pages 15-33]
  • L. El-Kalla, I. Using An accelerated Technique of The Laplace-Adomian Decomposition Method in Solving A class of Non-linear Integro-differential Equations [Volume 175, Issue 0, 2022, Pages 371-385]
  • L. Youssef, George. Comparing the Accuracy of Image Processing Softwares and Conventional Method for Pavement Distresses Measurement [Volume 180, Issue 0, 2023, Pages 405-422]

M

  • M. Abdel Aziz, A. A study on Cavitation erosion and its effect on metals [Volume 167, Issue 0, 2020, Pages 345-355]
  • M. AbdElgaber, K. Solution of a class of nonlinear differential equations using an accelerated version of Adomian decomposition method [Volume 167, Issue 0, 2020, Pages 15-33]
  • M. Abdelhamid, Mona Revitalization Of Historical Urban Parks Using A Smart Approach [Volume 164, Issue 0, 2019, Pages 20-36]
  • M. Abdelhamid, Mona Experimental Based Teaching Approach and Architectural Students Performance [Volume 164, Issue 0, 2019, Pages 37-48]
  • M. Abdelhamid, Mona Post-Pandemic Urban Robustness and Public Health in congested cities [Volume 174, Issue 0, 2022, Pages 285-307]
  • M. Abd El-Latif, Hazem Performance of Concrete Cylinders Confined with Carbon Fiber Reinforced Polymers under Axial Load [Volume 178, Issue 0, 2023, Pages 35-54]
  • M. Abdulaziz, A. Acoustic diagnosis of cavitation for centrifugal pumps of different materials. [Volume 164, Issue 0, 2019, Pages 214-228]
  • M. Abdulaziz, A. Analysis of Optimum Performance of Air Vessels Used in Damping Water Hammer Pressure Wave [Volume 167, Issue 0, 2020, Pages 275-292]
  • M. Abdulnaim, A. CFD Modelling of CH4/Air Flames Characteristics Issuing from a Two-Slot EV-Burner [Volume 176, Issue 0, 2022, Pages 171-184]
  • Mabrouk, Motaz Combustion Characteristics of Coal-Oil-Water Slurry in Furnaces [Volume 160, Issue 0, 2018, Pages 120-138]
  • M. A. Elbatch, A. Friction and Wear Characteristics of Polymeric Composites Reinforced by Nano Particles and Impregnated with Paraffin Oil [Volume 161, Issue 0, 2019, Pages 1-17]
  • Magdy Shafiq Mohamed, Karim The Melbourne Journey Towards Improved City Liveability: A Revival of a Dead City (Case of Melbourne CBD) [Volume 176, Issue 0, 2022, Pages 1-15]
  • Magdy Shafiq Mohamed, Karim Liveable City Centre: Livability through The Lens of The Singaporean Experience (Case of Singapore City Center) [Volume 176, Issue 0, 2022, Pages 16-28]
  • M. Ahmed, Samir Behavior of Prestressed Concrete Beams in the Presence of Opening Before and After Tensioning of Cables [Volume 178, Issue 0, 2023, Pages 1-16]
  • M. Ahmed, Samir Behavior of Steel Fiber Concrete Beams with Different Reinforcement Method Around Opening [Volume 179, Issue 0, 2023, Pages 13-24]
  • M. Ahmed, Samir Effect of Mineral Admixtures and Recycled Concrete on Concrete Compressive Strength [Volume 179, Issue 0, 2023, Pages 25-42]
  • Mahmoud, Anwar Characteristics of lightweight concrete with different admixtures [Volume 169, Issue 0, 2021, Pages 173-195]
  • Mahmoud, Aya Effect of Flange Openings on T-Section Beams Performance [Volume 167, Issue 0, 2020, Pages 237-243]
  • Mahmoud Ahmed Fouad, Sara The development of the principles of the Elements of Islamic architectural by using parametric algorithms [Volume 170, Issue 0, 2021, Pages 104-122]
  • Mahmoud Ahmed Fouad, Sara, The Revival of Islamic Architecture using Parametric Algorithms [Volume 170, Issue 0, 2021, Pages 123-146]
  • Mahmoud Elnahas, Walid Application and Performance Measurement of Total Productive Maintenance: Case study of a Food Industries Company in Egypt [Volume 160, Issue 0, 2018, Pages 1-25]
  • Mahmoud Gad EL- Rab, Raafat Effect of impact angle and impact velocity on the slurry erosion behavior of high density polyethylene (HDPE) [Volume 171, Issue 0, 2021, Pages 269-281]
  • Mahmoud Mohamed Omayer, Hayam أداة رصد وتحليل التغيرات في األنشطة التي تحدث داخل الفراغ العمراني [Volume 161, Issue 0, 2019, Pages 176-189]
  • Mahmoud Mohamed Omayer, Hayam تقييم سلوک المستخدمين کمدخل في تحقيق التنمية للفراغات العمرانية [Volume 161, Issue 0, 2019, Pages 190-204]
  • Mahmoud Moustafa, Yasser Latest Street Food Vending Organization Attempts in Cairo: An Evaluation of the “Street 306” Model [Volume 173, Issue 0, 2022, Pages 16-36]
  • Mahmoud Nagi, Ahmed دراسة لبعض أنماط التوثیق العلمی للبحث المعماری Study of some documentation styles for architectural research [Volume 175, Issue 0, 2022, Pages 46-57]
  • Mahmoud Sadek, Dina The Effects of Reuse Marble Waste on Hollow Concrete Blocks in Constructions [Volume 160, Issue 0, 2018, Pages 192-205]
  • Mahmoud Shaaban Mabrouk, Mohamed Geomorphological hazard analysis using dem along the Eastern coast between Marsa Alam and Ras Gharib, Egypt. [Volume 174, Issue 0, 2022, Pages 1-21]
  • Mahmoud Taha Sleem, .Shams Integrated Mobility as an approach to Elevate urban quality )case study of Al Rehab neighbourhood) [Volume 173, Issue 0, 2022, Pages 37-51]
  • M. Aly, Marwa Compatibility of Water Resources System in Egypt to Future Climate Change Projections, Case Study Qena Governorate - Upper Egypt [Volume 170, Issue 0, 2021, Pages 150-168]
  • Mamdouh, Hala Effect of Flange Openings on T-Section Beams Performance [Volume 167, Issue 0, 2020, Pages 237-243]
  • Mamdouh, Hala Effect of Different Reinforced Type on RC Beams [Volume 167, Issue 0, 2020, Pages 244-256]
  • Mamdouh, Hala Effect of BFRP Sheets on Strengthening Deep Beams with Openings [Volume 178, Issue 0, 2023, Pages 304-324]
  • Mamdouh, Hala Slenderness Effect for The Composite RC Columns with Steel Angles at The Corners; Experimentally and Analytically [Volume 181, Issue 0, 2024, Pages 141-160]
  • Mandour, Alaa A Critical Review of Quality Assessment Tools for Public Spaces [Volume 177, Issue 0, 2023, Pages 255-274]
  • Mandour, Alaa The digital transformation toward an integrated design process [Volume 177, Issue 0, 2023, Pages 31-58]
  • Mandour, Alaa Improving Quality of Student’s Life on University Campus (Guidelines of New Assessment Tools) [Volume 178, Issue 0, 2023, Pages 429-445]
  • Mansour, Y. THE PHILOSOPHY OF PARADIGM SHIFT ACROSS THE HISTORY OF ARCHITECTURAL PRACTICES [Volume 172, Issue 0, 2021, Pages 190-211]
  • Marey, Sayed Applying innovative criteria to achieve Biomimicry in Architecture [Volume 176, Issue 0, 2022, Pages 90-109]
  • Marey Mansour, Sayed A Methodological application of New Techniques for Rationalization Energy Consumption in Buildings [Volume 162, Issue 0, 2019, Pages 138-161]
  • Marey Nagy, Sayed Development of Drainage and water supply systems to reduce water consumption in Residential Buildings in Egypt [Volume 170, Issue 0, 2021, Pages 47-62]
  • M. Assal, Ahmed Performance of solar dish Stirling engine systems under Egyptian operating conditions [Volume 160, Issue 0, 2018, Pages 79-104]
  • M. Assem, Ayman Investigating Bio-Inspired Approaches for Designing Psycho-Oncological Support Units in Egypt [Volume 173, Issue 0, 2022, Pages 442-452]
  • M. ayash, Nehal Slenderness Effect for The Composite RC Columns with Steel Angles at The Corners; Experimentally and Analytically [Volume 181, Issue 0, 2024, Pages 141-160]
  • Mazen Abdel Salam, rasha ل تأثير المعالجات التصميمية لفتحات واجهات المباني الإدارية على تقليل الاکتساب الحرارى Analyzing Impact of Design Treatments for facades' Openings of Office Buildings on Reducing Heat Gain [Volume 174, Issue 0, 2022, Pages 83-107]
  • M. Bassiuny, A. FPGA BASED BEVEL GEARBOX FAULT DIAGNOSIS APPROACH [Volume 160, Issue 0, 2018, Pages 59-78]
  • M. Bassuiny, A. Semi-Active Vibration Control of Train Suspension Using Optimized PID Controller [Volume 181, Issue 0, 2024, Pages 33-51]
  • Mekki, Ali STUDYING THE CHANGE OF SOIL RESONANCE PROPERTIES DUE TO BURRIED ROOM IN THE SUBSURFACE [Volume 171, Issue 0, 2021, Pages 151-165]
  • M. El-Bahrawy, Aya Mathematics Tools and its Efficiency on the Building’s Environmental Performance [Volume 170, Issue 0, 2021, Pages 26-46]
  • M. Elfakharany, Mohamed Post-Pandemic Urban Robustness and Public Health in congested cities [Volume 174, Issue 0, 2022, Pages 285-307]
  • M. Elfakharany, Mohamed Reviewing the impact of buildings integration systems on energy consumption [Volume 177, Issue 0, 2023, Pages 373-392]
  • M. El-Fakharany, Zeinab Interaction between Surface Water and Groundwater in Experimental Site Close to Damietta Branch, Egypt. [Volume 177, Issue 0, 2023, Pages 17-30]
  • M. Elgarayhi, Reda SHRINKAGE AND THERMAL EFFECTS IN R/C FLAT PLATE AND RAFT FOUNDATION [Volume 163, Issue 0, 2019, Pages 234-256]
  • M. Elmorsy, Medhat PERFORMANCE BASED SEISMIC ASSESSMENT OF BUILDINGS WITH CURVED SHEAR WALLS [Volume 164, Issue 0, 2019, Pages 178-192]
  • M. El-Said, El-Zoughiby Punching Shear Behavior of Interior Slab-Column Connections Reinforced with Vertical Bolts [Volume 162, Issue 0, 2019, Pages 15-31]
  • M. Elshamy, S. Experimental Study for Enhancement the Cooling System and Exhaust Gasses for Gasoline Automotive Engine Using Nano-Fluid. [Volume 161, Issue 0, 2019, Pages 96-111]
  • M. El-Shourbagy, M. Shape Recognition Using V4 Dominant Conical Meshes [Volume 167, Issue 0, 2020, Pages 1-14]
  • M. El-ssayed, Hatem Settlement Prediction due to Diaphragm Walls Installation at Heliopolis Metro Station in Cairo, Egypt [Volume 178, Issue 0, 2023, Pages 17-34]
  • M. El Zafarany, Abbas The Thermal comfort for Excavated cliff buildings:Taba, Egypt as a case study [Volume 160, Issue 0, 2018, Pages 139-158]
  • Menshawy mostafa, Yara Reclassify logistic zones in a quantitative way [Volume 179, Issue 0, 2023, Pages 232-248]
  • Metered, H. Semi-Active Vibration Control of Train Suspension Using Optimized PID Controller [Volume 181, Issue 0, 2024, Pages 33-51]
  • M. Farghal, M. Shape Recognition Using V4 Dominant Conical Meshes [Volume 167, Issue 0, 2020, Pages 1-14]
  • M. Fawaz, Essam Airport site suitability and development based on multiCriteria in Egypt [Volume 176, Issue 0, 2022, Pages 197-219]
  • M. Fawzy, Mona Behavior of Steel Fiber Concrete Beams with Different Reinforcement Method Around Opening [Volume 179, Issue 0, 2023, Pages 13-24]
  • M. Fawzy, Mona Effect of Mineral Admixtures and Recycled Concrete on Concrete Compressive Strength [Volume 179, Issue 0, 2023, Pages 25-42]
  • M. Gadelrab, R. Weight optimization of fixed landing gear for medium range UAV [Volume 161, Issue 0, 2019, Pages 18-36]
  • M. Hashem, Mona دراسة األداء الحراری للمبانی المسقوفة باألقبیة فی المناطق الجافة الصحراویة المصریة. [Volume 175, Issue 0, 2022, Pages 156-170]
  • M. Hassan, Safiya Settlement Prediction due to Diaphragm Walls Installation at Heliopolis Metro Station in Cairo, Egypt [Volume 178, Issue 0, 2023, Pages 17-34]
  • M. Hassan, Wael PERFORMANCE OF COUPLING BEAMS WITH OPENINGS EXPOSED TO CYCLIC LOADING [Volume 168, Issue 0, 2020, Pages 191-210]
  • M. Hassanain, Ahmed Chemical Treatment of Industrial Wastewater Using Fenton Reaction [Volume 173, Issue 0, 2022, Pages 219-231]
  • Mhrous, Yasmin Enhancement of heat transfer of double tube heat exchanger with inner twisted spiral tube [Volume 172, Issue 0, 2021, Pages 67-84]
  • M. Hussien, A. Experimental Investigation of Stability and Structure of Vertical LPG Inverse Diffusion Flames Issuing from an Elliptic Burner [Volume 171, Issue 0, 2021, Pages 119-137]
  • M. Ibrahim, M. Simulation of Performance for 140 MW Thermal Power Station at Alkuraymat Using Solar Parabolic Trough Concentrators with Thermal Storage [Volume 171, Issue 0, 2021, Pages 240-259]
  • M. Kamal, Ahmed. Experimental Study of the Feasibility of Friction Stir Spot Welding in Polyethylene [Volume 161, Issue 0, 2019, Pages 37-54]
  • M. Khodeir, Laila Identifying Retrofit Technology to Improve Building Energy Performance: A Review [Volume 178, Issue 0, 2023, Pages 174-200]
  • M. Lotfy, Hanaa Finite Element Modeling of Fatigue Life of Steel Wire [Volume 163, Issue 0, 2019, Pages 15-26]
  • M M Abdala, Antar Thermal Enhancement of Parabolic Trough Collectors using Absorber Tubes with Internally longitudinal Round Edge Fins [Volume 173, Issue 0, 2022, Pages 356-375]
  • M. Mahmoud, Shimaa Nonlinear Finite Element Analysis of Polypropylene Lightweight RC Beams [Volume 173, Issue 0, 2022, Pages 1-15]
  • M. Mandour, M. Heat Transfer From Elliptic Cylinder Immersed In A Fluidized Bed [Volume 166, Issue 0, 2020, Pages 389-405]
  • M.Matter, Nermen Artificial Intelligence in Architecture: Integration into Architectural Design Process [Volume 181, Issue 0, 2024, Pages 1-16]
  • M.M. Genidi, Magdy Resistance of Punching Shear Strength of RC Flat Slabs According to Laboratory and Finite Element Analysis Study Comparison of International Codes [Volume 174, Issue 0, 2022, Pages 285-305]
  • M. Mina, Ehab Experimental Investigation and CFD modelling for Indoor Air Thermal Conditions in Worship Buildings in Egypt: Church and Masjid [Volume 175, Issue 0, 2022, Pages 398-341]
  • M. Mohamed, Marwa, Behaviour of Contiguous Piles Group with Different Pile Diameters in Sandy Soil under Vertical Loading [Volume 172, Issue 0, 2021, Pages 412-423]
  • M. Mohamed, Marwa. Behaviour of Contiguous Pile Group with Different Pile Spacing in Sandy Soil under Vertical Loading [Volume 172, Issue 0, 2021, Pages 402-411]
  • M. Mohye Eldeen, Amira. Comparative study of landfill gases generation Via bioreactor and traditional design for maximizing the power generation [Volume 175, Issue 0, 2022, Pages 237-261]
  • M. Mostafa, Hussein Settlement Prediction due to Diaphragm Walls Installation at Heliopolis Metro Station in Cairo, Egypt [Volume 178, Issue 0, 2023, Pages 17-34]
  • M. Naguib, Ingy Sustainable Touristic path toward cultural identity [Volume 167, Issue 0, 2020, Pages 404-420]
  • M. Naguib, Ingy Post-Pandemic Urban Robustness and Public Health in congested cities [Volume 174, Issue 0, 2022, Pages 285-307]
  • Mohamed, A. Improving the cooling performance of a data center: impact of unit arrangement and CFD setups [Volume 168, Issue 0, 2020, Pages 117-145]
  • Mohamed, A. Performance evaluation of a solar absorption air conditioning system under arid climatic conditions [Volume 169, Issue 0, 2021, Pages 217-234]
  • Mohamed, A. Impact of phase change materials and brick thickness on thermal comfort in free-floating mode [Volume 175, Issue 0, 2022, Pages 386-397]
  • Mohamed, Ayman Assessment of energy saving in residential buildings using energy efficiency measures under Cairo climatic conditions [Volume 166, Issue 0, 2020, Pages 320-349]
  • Mohamed, Ayman Implementing the Net Zero Energy Building “nZEB” Strategies on an Existing Administration Building in Egypt [Volume 168, Issue 0, 2020, Pages 146-171]
  • Mohamed, Ayman Effect of Radiant Surface Combined with Displacement Ventilation in Office Building in Egypt [Volume 177, Issue 0, 2023, Pages 231-254]
  • Mohamed Abd El-badia, Tarek Effect of impact angle and impact velocity on the slurry erosion behavior of high density polyethylene (HDPE) [Volume 171, Issue 0, 2021, Pages 269-281]
  • Mohamed Abdelhay Shaheen, Aya Double Skin Green Facade in Workplace for Enhancing Thermal Performance in Greater Cairo [Volume 168, Issue 0, 2020, Pages 1-12]
  • Mohamed Abd El-Maksoud, Rafea, COMPRESSOR ENERGY AND EXERGY ANALYSIS [Volume 168, Issue 0, 2020, Pages 211-226]
  • Mohamed Abd El-Rahman, Sahar Biomimicry inspired Adaptive Building Envelope in hot climate [Volume 166, Issue 0, 2020, Pages 30-47]
  • Mohamed Abd El-Rahman, Sahar Sustainable Optimization for thermal comfort and building energy efficiency in Cairo [Volume 166, Issue 0, 2020, Pages 48-65]
  • Mohamed Abd Elrazike, Mahmoud The Effects of Reuse Marble Waste on Hollow Concrete Blocks in Constructions [Volume 160, Issue 0, 2018, Pages 192-205]
  • Mohamed Abd Elregal, Ahmed Behavior of Prestressed Concrete Beams in the Presence of Opening Before and After Tensioning of Cables [Volume 178, Issue 0, 2023, Pages 1-16]
  • Mohamed Abdelsalam, Gehad Effectiveness of High Energy Efficiency to Minimize Energy Consumption for Residential Buildings in Egypt [Volume 165, Issue 0, 2020, Pages 78-95]
  • Mohamed Ahmed Hamed, Saeed ENGTHENING OF EXISTING STEEL BEAMS USING CFRP [Volume 169, Issue 0, 2021, Pages 159-172]
  • Mohamed Aly, Marwa FLASH FLOOD MANAGEMENT IN ARID REGION: A CASE STUDY URBAN BANI WASIL VILLAGE, SOHAG GOVERNORATE [Volume 169, Issue 0, 2021, Pages 130-146]
  • Mohamed Amin Ahmed, Hossam El-Din Study of Morphological Changes for the River Nile in ElDahab Island, Giza Governorate [Volume 180, Issue 0, 2023, Pages 394-404]
  • Mohamed El hashimy, Awad MECHANICAL BEHAVIOUR OF CONCRETE PRISMS STRENGTHENED BY NANO GRAPHENE FIBERS [Volume 180, Issue 0, 2023, Pages 244-359]
  • Mohamed El hashimy, Awad BEHAVIOUR OF MORTAR PRISMS STRENGTHENED BY NANO GRAPHENE FIBERS [Volume 181, Issue 0, 2024, Pages 90-105]
  • Mohamed ElHashimy, Awad Behavior of Prestressing Bars in Reinforced Concrete Columns as Transverse Reinforcement [Volume 175, Issue 0, 2022, Pages 19-36]
  • Mohamed EL Razzaz, Zeinab Effectiveness of High Energy Efficiency to Minimize Energy Consumption for Residential Buildings in Egypt [Volume 165, Issue 0, 2020, Pages 78-95]
  • Mohamed Fikry Elazzazy, Mohamed Latest Street Food Vending Organization Attempts in Cairo: An Evaluation of the “Street 306” Model [Volume 173, Issue 0, 2022, Pages 16-36]
  • Mohamed Hassan Shaltout, Fatma Chemical Treatment of Industrial Wastewater Using Fenton Reaction [Volume 173, Issue 0, 2022, Pages 219-231]
  • Mohamed Helal Hamdy, Doaa Applying Urban Livability indicators in gated communities [Volume 174, Issue 0, 2022, Pages 355-369]
  • Mohamed Kamel, Shaimaa INTERIOR MORPHOLOGY AND THE RESPONSE OF SPACE PERCEIVERS [Volume 172, Issue 0, 2021, Pages 308-328]
  • Mohamed Khodeir, Laila Assessing The Impact of Stakeholders’ Interaction on The Efficiency of Managing Risk in Construction Projects A Literature Review [Volume 173, Issue 0, 2022, Pages 299-315]
  • Mohamed Mandour, Alaa Integrated Mobility as an approach to Elevate urban quality )case study of Al Rehab neighbourhood) [Volume 173, Issue 0, 2022, Pages 37-51]
  • Mohamed Mohsen, Khaled NUMERICAL STUDY ON THE OPTIMIZATION OF SMOKE VENTILATION IN A SITUATION OF A TRAIN FIRE AT A SUBWAY STATION [Volume 166, Issue 0, 2020, Pages 350-365]
  • Mohamed Mustafa Eissa, Abeer Conventional and Advanced Glazing Technologies for Enhancing Thermal and Lighting Performance [Volume 171, Issue 0, 2021, Pages 1-15]
  • Mohamed Radwan, Amr The behavior of underground conduits buried in soil [Volume 181, Issue 0, 2024, Pages 106-140]
  • Mohamed Sadek, Hatem NUMERICAL STUDY ON THE OPTIMIZATION OF SMOKE VENTILATION IN A SITUATION OF A TRAIN FIRE AT A SUBWAY STATION [Volume 166, Issue 0, 2020, Pages 350-365]
  • Mohamed Saeed, Doha Building Demolition Waste in Achieving a Sustainable Vernacular Building With a New Architectural Style in Egypt’s New Cities [Volume 174, Issue 0, 2022, Pages 244-261]
  • Mohamed Wafaie Abdel-Salam, Ehab Geomorphological hazard analysis using dem along the Eastern coast between Marsa Alam and Ras Gharib, Egypt. [Volume 174, Issue 0, 2022, Pages 1-21]
  • Mohamed Wafaie AbdelSalam, Ehab Study of Morphological Changes for the River Nile in ElDahab Island, Giza Governorate [Volume 180, Issue 0, 2023, Pages 394-404]
  • Mohamed Zaki Abd Elnaby, Farag دور التصميم العمراني المستدام في تقييم الرؤية المستقبلية للمحيط الحضري بالحرم المكي حالة دراسية - مشروع طريق الملك عبد العزيز)) The Role of Sustainable Urban Design to Evaluate the Future Vision of the Urban Surrounding in The Holy Mosque in Mecca )Case Study- King Abdul Aziz Road Project( [Volume 176, Issue 0, 2022, Pages 124-149]
  • Mohammed Abdel-Alim, Ahmed Assessment and Prediction Planning of R.C Structures Using BIM Technology [Volume 167, Issue 0, 2020, Pages 394-403]
  • Mohammed Refay Ali, Ahmed الحفاظ على هوية عمارة وعمران الواحات البحرية المستدامة Preserving the identity of Architecture and Urban in the sustainable Bahariya oasis [Volume 176, Issue 0, 2022, Pages 248-254]
  • Mokhtar, omar Using the Galerkin method to compute the eigenvalues and eigenelements of the second-order Sturm–Liouville problems [Volume 163, Issue 0, 2019, Pages 27-42]
  • Momen Afifi, Mohamed Smart Building: Application of Intelligent Concept Through Upgrading Strategy and A Responsive Approach as A Catalyst of Change to Smart Integration Concept [Volume 163, Issue 0, 2019, Pages 59-79]
  • Momen Afifi, Mohamed Smart Eco Home: Towards Sustainable Community Within Relevant Strategic Integrated Intelligence of Architecture. [Volume 163, Issue 0, 2019, Pages 80-105]
  • Moneer Gad, Maged دور إستراتيجية کايزن "KAIZEN" في تحسين إدارة مشروعات التشييد و البناء بالتطبيق على شرکات المقاولات بمدينة القاهرة الکبري [Volume 165, Issue 0, 2020, Pages 133-149]
  • Moneer Gad, Maged تطبيق الهنسة القيمية لحل مشکلة تأثير الأمطار على حرکة المرور [Volume 166, Issue 0, 2020, Pages 183-197]
  • Moneer Gad, Maged دراسة مدى تأثير زيادة المساحة على تکاليف أعمال التشطيبات [Volume 167, Issue 0, 2020, Pages 356-370]
  • Moneer Gad, Maged اشکالیة تدقیق البرنامج الزمنی لمشروعات ترمیم وصیانة المبانی األثریة [Volume 175, Issue 0, 2022, Pages 113-124]
  • Moneer Gad, Maged محاولة صياغة منهاجية لتقييم جودة إعادة تصميم وتخطيط محاور المناطق التاريخية دراسة حالة: محور شارع الحجاز – منطقة الميرلاند – حي مصر الجديدة Attempting formulation to assess the quality of redesign and planning of historic areas Case study: Al Hijaz Axis-Maryland area-Heliopolis district [Volume 180, Issue 0, 2023, Pages 75-90]
  • Moneib, Hany Combustion Characteristics of Coal-Oil-Water Slurry in Furnaces [Volume 160, Issue 0, 2018, Pages 120-138]
  • Monteleb M. Ali, Abdel دراسة األداء الحراری للمبانی المسقوفة باألقبیة فی المناطق الجافة الصحراویة المصریة. [Volume 175, Issue 0, 2022, Pages 156-170]
  • Morad Abdelmohsen, Sherif A Biophilic Approach for Optimizing Daylighting Performance and Views-Out in Intensive Care Units Using Combined Light Shelf. [Volume 165, Issue 0, 2020, Pages 57-77]
  • Morsi, A. Performance evaluation of a solar absorption air conditioning system under arid climatic conditions [Volume 169, Issue 0, 2021, Pages 217-234]
  • MORSY MOHAMED MOHAMED ALY, SAHAR BIOPHILIC DESIGN CRITERIA FOR PRODUCTIVITY (BDCP) IN WORKSPACES [Volume 172, Issue 0, 2021, Pages 151-170]
  • Morsy Mohammed, Sahar The development of the principles of the Elements of Islamic architectural by using parametric algorithms [Volume 170, Issue 0, 2021, Pages 104-122]
  • Morsy Mohammed, Sahar The Revival of Islamic Architecture using Parametric Algorithms [Volume 170, Issue 0, 2021, Pages 123-146]
  • M. Osman, Medhat دراسة األداء الحراری للمبانی المسقوفة باألقبیة فی المناطق الجافة الصحراویة المصریة. [Volume 175, Issue 0, 2022, Pages 156-170]
  • Mostafa, A. Performance evaluation of a solar absorption air conditioning system under arid climatic conditions [Volume 169, Issue 0, 2021, Pages 217-234]
  • Mostafa, A. Numerical Investigation of a Desiccant Packed Bed Performance [Volume 169, Issue 0, 2021, Pages 266-279]
  • Mostafa, A. Performance evaluation of a solar adsorption cooling system under Mediterranean climatic conditions for cold stores applications [Volume 174, Issue 0, 2022, Pages 226-243]
  • Mostafa, A. Performance Investigation of a Photovoltaic Module Integrated with Different Optical Filters [Volume 175, Issue 0, 2022, Pages 137-155]
  • Mostafa, A. Performance Evaluation of Solar Energy-driven Binary Rankine Cycle under Egyptian Climatic Conditions [Volume 178, Issue 0, 2023, Pages 242-264]
  • Mostafa, Abdelzaher E. A. Comparing the Accuracy of Image Processing Softwares and Conventional Method for Pavement Distresses Measurement [Volume 180, Issue 0, 2023, Pages 405-422]
  • Mostafa, Abd Elzaher Studying the potentiality of using low cost system based on image analysis technique to survey the gravel’s size in asphalt mixes [Volume 167, Issue 0, 2020, Pages 257-274]
  • Mostafa, Ahmed Effect of impact angle and impact velocity on the slurry erosion behavior of high density polyethylene (HDPE) [Volume 171, Issue 0, 2021, Pages 269-281]
  • Mostafa, M. Galerkin Method for Nonlinear Volterra-Fredholm Integro-Differential Equations Based on Chebyshev Polynomials [Volume 170, Issue 0, 2021, Pages 169-183]
  • Mostafa, Ola Optimization of an Environmentally Sustainable HTL-Free Perovskite Solar Cell using SCAPS-1D [Volume 179, Issue 0, 2023, Pages 116-132]
  • Mostafa, R. INC-MPPT Algorithm for Maximizing Energy Conversion Efficiency of Thermoelectric Generating System [Volume 162, Issue 0, 2019, Pages 102-118]
  • Mostafa Kamal Sabry, Hanan A Biophilic Approach for Optimizing Daylighting Performance and Views-Out in Intensive Care Units Using Combined Light Shelf. [Volume 165, Issue 0, 2020, Pages 57-77]
  • Mostafa Kamal Sabry, Hanan Argumentation for Impact of Indoor Environmental Quality on Users’ Performance: Online Self-assessment Questionnaire. [Volume 160, Issue 0, 2018, Pages 159-172]
  • Mostafa Kamal Sabry, Hanan Double Skin Green Facade in Workplace for Enhancing Thermal Performance in Greater Cairo [Volume 168, Issue 0, 2020, Pages 1-12]
  • Mostafa Sobhy, Tarek Creating healthy spaces indicators [Volume 169, Issue 0, 2021, Pages 1-15]
  • Mostafa Sobhy, Tarek Healthy urban space ratios through Environmental and Human Aspects [Volume 169, Issue 0, 2021, Pages 16-29]
  • Mostafa Sobhy, Tarek A New Urban Approach To Achieve Clean Smart Cities [Volume 177, Issue 0, 2023, Pages 103-115]
  • Mourad, Mohammad Effect of n-butanol/diesel blends on performance, emission, noise and vibration characteristics of a diesel engine generator [Volume 163, Issue 0, 2019, Pages 203-217]
  • Moustafa, Ashraf Analysis of Optimum Performance of Air Vessels Used in Damping Water Hammer Pressure Wave [Volume 167, Issue 0, 2020, Pages 275-292]
  • Moustafa Gaawan, Sameh ENGTHENING OF EXISTING STEEL BEAMS USING CFRP [Volume 169, Issue 0, 2021, Pages 159-172]
  • M. Rabeih, E. Free vibration analysis for a pipe conveying fluid with intermediate support and carrying multiple concentrated masses [Volume 160, Issue 0, 2018, Pages 26-43]
  • M. Radwan, Amr, Behaviour of Contiguous Piles Group with Different Pile Diameters in Sandy Soil under Vertical Loading [Volume 172, Issue 0, 2021, Pages 412-423]
  • M. Radwan, Amr. Behaviour of Contiguous Pile Group with Different Pile Spacing in Sandy Soil under Vertical Loading [Volume 172, Issue 0, 2021, Pages 402-411]
  • M. RADWAN, A. BEHAVIOUR OF PILES SUBJECTED TO LATERAL FORCES IN COHESIVE SOIL [Volume 171, Issue 0, 2021, Pages 260-268]
  • M. Shaaban, Sayed SYSTEM IDENTIFICATION AND SLIDING MODE TRACKING CONTROL FOR ELECTRO-HYDRAULIC STEER-BY-WIRE SYSTEM [Volume 172, Issue 0, 2021, Pages 121-130]
  • M. Tahwia, Ahmed Durability performance of silica fume Self-Compacting Concrete [Volume 164, Issue 0, 2019, Pages 193-213]
  • M. Taiea, A. Simulation of Performance for 140 MW Thermal Power Station at Alkuraymat Using Solar Parabolic Trough Concentrators with Thermal Storage [Volume 171, Issue 0, 2021, Pages 240-259]
  • M. Talaat Flefal, Marwa URBAN POLICIES AS A SMART GROWTH TOOL TO CONTROL THE ENVIRONMENAL IMPACTS OF TRANSPORTATION [Volume 162, Issue 0, 2019, Pages 162-181]
  • Muhammed Abbas el -Zafarany, Abbas Contextual Design for New Additions in Historical Complexes (Cairo University Campus) [Volume 176, Issue 0, 2022, Pages 220-247]
  • M, Wahba, Sherine Downtown Pedestrian mall as a Strategy to Enhance the Egyptian Street Life [Volume 163, Issue 0, 2019, Pages 43-58]
  • M. Wahby, Ahmed Comparing the Accuracy of Image Processing Softwares and Conventional Method for Pavement Distresses Measurement [Volume 180, Issue 0, 2023, Pages 405-422]
  • M. Yehiab, Hossam. Hybrid Abrasive Electrochemical Grinding Machining of alloy steel K110 [Volume 163, Issue 0, 2019, Pages 294-308]
  • M. Yousef, Ahmed DESIGN OF REINFORCED CONCRETE LEDGE BEAMS - SAFETY AND ECONOMY [Volume 166, Issue 0, 2020, Pages 242-261]
  • M. Yousef, Ahmed Damaged Orthotropic Failure Surface for Masonry Walls [Volume 162, Issue 0, 2019, Pages 32-50]
  • M. Zahran, Ismail Multi response optimization of quality characteristics in Offset printing industry using Taguchi approach and Grey relational analysis [Volume 172, Issue 0, 2021, Pages 295-307]

N

  • N. Abd El-Majeed, Osama The Impact of Surface Treatments on the Architectural Formation of Green Buildings "Comparative Study of some Contemporary Global Models" [Volume 170, Issue 0, 2021, Pages 50-77]
  • Nabil, Ahmed Studying the potentiality of using low cost system based on image analysis technique to survey the gravel’s size in asphalt mixes [Volume 167, Issue 0, 2020, Pages 257-274]
  • Nafeaa, Somia Assessment of energy saving in residential buildings using energy efficiency measures under Cairo climatic conditions [Volume 166, Issue 0, 2020, Pages 320-349]
  • Nagib, M. Experimental Study for Enhancement the Cooling System and Exhaust Gasses for Gasoline Automotive Engine Using Nano-Fluid. [Volume 161, Issue 0, 2019, Pages 96-111]
  • Nagy, Fatma The digital transformation toward an integrated design process [Volume 177, Issue 0, 2023, Pages 31-58]
  • Nagy Sarhan, AlaaElDin The Use of Green Design Strategies for Achieving Thermal Comfort (Applying PMV as a Measurement Tool) [Volume 171, Issue 0, 2021, Pages 35-46]
  • Nassar, S. Improving the cooling performance of a data center: impact of unit arrangement and CFD setups [Volume 168, Issue 0, 2020, Pages 117-145]
  • Nasser Abdallah, Moamen INTERIOR MORPHOLOGY AND THE RESPONSE OF SPACE PERCEIVERS [Volume 172, Issue 0, 2021, Pages 308-328]
  • Nayel, Mohamed Estimation of photovoltaic module parameters based on datasheet: A review and a proposed method [Volume 179, Issue 0, 2023, Pages 178-203]
  • N. El Baz, A. A study on Cavitation erosion and its effect on metals [Volume 167, Issue 0, 2020, Pages 345-355]
  • N. El Nawawii, Hala The Thermal comfort for Excavated cliff buildings:Taba, Egypt as a case study [Volume 160, Issue 0, 2018, Pages 139-158]
  • Nessim, Aahraf Identifying the gap between practical and educational fields in the Egyptian AEC industry in the age of digitalization [Volume 176, Issue 0, 2022, Pages 281-303]
  • Nessim, Ashraf DOUBLE-SKIN FACADES IN HEALING ENVIRONMENTS: AN APPROACH FOR ENHANCING DAYLIGHTING PERFORMANCE IN SOUTH-ORIENTED PATIENT ROOMS IN CAIRO, EGYPT [Volume 165, Issue 0, 2020, Pages 96-113]
  • N. M. Elwekeel,, Fifi Heating the air in buildings by evacuated tube solar collector used AL2O3/ water nanofluid at Cairo-Egypt climates [Volume 164, Issue 0, 2019, Pages 229-249]
  • N.M. Elwekeel, Fifi. Experimental Investigation of Low GWP Refrigerants Applied to Split Air Conditioner [Volume 162, Issue 0, 2019, Pages 51-67]
  • N. Metwally, M. Simulation of Performance for 140 MW Thermal Power Station at Alkuraymat Using Solar Parabolic Trough Concentrators with Thermal Storage [Volume 171, Issue 0, 2021, Pages 240-259]
  • Nossair, Zaki Development of QPSK Demodulator using DSP Techniques [Volume 163, Issue 0, 2019, Pages 1-14]

O

  • O, Abu-Elyazeed. Experimental Study on Polymeric materials Suppressing Fires Using Low Pressure Water Mist System [Volume 160, Issue 0, 2018, Pages 105-119]
  • Osama El-Sherif, Moataz Implementing the Net Zero Energy Building “nZEB” Strategies on an Existing Administration Building in Egypt [Volume 168, Issue 0, 2020, Pages 146-171]
  • Osama Mohammed Fikry, Noha Teachers’ Interpretation of “Learning through Landscapes” in Egyptian School Grounds [Volume 168, Issue 0, 2020, Pages 325-342]

R

  • Raafat, M. Optimization of passive transit signal priority for El-Raml tram, Alexandria, Egypt [Volume 177, Issue 0, 2023, Pages 1-16]
  • R. A. Atia, Mostafa Performance of solar dish Stirling engine systems under Egyptian operating conditions [Volume 160, Issue 0, 2018, Pages 79-104]
  • Rabeih, El-Adl Experimental Analysis of the Contact Phenomenon in a Simulated Drill-string [Volume 180, Issue 0, 2023, Pages 1-13]
  • Radwan, Ali Numerical Study for Enhancement of Concentrator Photovoltaic (CPV) Cells Efficiency [Volume 163, Issue 0, 2019, Pages 309-342]
  • Rafat Saad, Eslam Development of Sustainable Asphalt Pavement Mixture Using Recycled concrete aggregate, Crumb Rubber and Waste Engine Oil [Volume 180, Issue 0, 2023, Pages 39-58]
  • Ragab, Mohamed Using Metakaolin Material As Additive For Hot Asphalt Mixtures [Volume 177, Issue 0, 2023, Pages 203-211]
  • Ramadan Abd El monem, Yasmen MECHANICAL BEHAVIOUR OF CONCRETE PRISMS STRENGTHENED BY NANO GRAPHENE FIBERS [Volume 180, Issue 0, 2023, Pages 244-359]
  • Ramadan Abd El monem, Yasmen BEHAVIOUR OF MORTAR PRISMS STRENGTHENED BY NANO GRAPHENE FIBERS [Volume 181, Issue 0, 2024, Pages 90-105]
  • Rashad, Mohammed Simulation-Based Optimization of Smart Building Energy Using Artificial Neural Network [Volume 165, Issue 0, 2020, Pages 210-231]
  • Raslan, Rania Reshaping Patient Approach to health facilities throughout and beyond Pandemics: Redesigning entrances and waiting areas [Volume 174, Issue 0, 2022, Pages 38-51]
  • Raslan, Rania Post-COVID-19 Implemented Guidelines in Urban Spaces: The case of Alexandria, Egypt [Volume 174, Issue 0, 2022, Pages 52-61]
  • Reda Kamel, Randa A Methodological application of New Techniques for Rationalization Energy Consumption in Buildings [Volume 162, Issue 0, 2019, Pages 138-161]
  • Reda Kamel, Randa Mathematics Tools and its Efficiency on the Building’s Environmental Performance [Volume 170, Issue 0, 2021, Pages 26-46]
  • Refat, Mostafa Alternative care sites for surge capacity during pandemics [Volume 176, Issue 0, 2022, Pages 304-329]
  • R. Elmahdy, A. Solution of a class of nonlinear differential equations using an accelerated version of Adomian decomposition method [Volume 167, Issue 0, 2020, Pages 15-33]
  • Rezk, Hegazy INC-MPPT Algorithm for Maximizing Energy Conversion Efficiency of Thermoelectric Generating System [Volume 162, Issue 0, 2019, Pages 102-118]
  • Rostom Atia, Mostafa A supervised learning technique for programming a welding arm robot using vision system [Volume 162, Issue 0, 2019, Pages 86-101]
  • Roushdy, Tamer Multi response optimization of quality characteristics in Offset printing industry using Taguchi approach and Grey relational analysis [Volume 172, Issue 0, 2021, Pages 295-307]
  • R. Roman, Magdy SYSTEM IDENTIFICATION AND SLIDING MODE TRACKING CONTROL FOR ELECTRO-HYDRAULIC STEER-BY-WIRE SYSTEM [Volume 172, Issue 0, 2021, Pages 121-130]

S

  • Saad Atwa, Mohammed وأثره على تنفيذ مشروعات التشييد تطبيق نظام إدارة الجوده Applying Quality Management System and Effect on Execution of Construction Projects [Volume 166, Issue 0, 2020, Pages 296-319]
  • S. Abd-Elatif, A. EXPERIMENTAL INVESTIGATION OF POWER TRANSFORMERS PROTECTION USING WAVELETS AND PATTERN RECOGNITION TECHNIQUES [Volume 165, Issue 0, 2020, Pages 1-13]
  • S. Abdelwahed, Basem Performance of Exterior Beam-Column Joints with U-Shaped Bars for Different Stirrups Detailing: Numerical Study [Volume 172, Issue 0, 2021, Pages 131-150]
  • S. Abdel-wahed, Mohamed Investigating the Impact of Magnetic Fields and Pulsating Pressure on Non-Newtonian Fluid Flow in Symmetric/Asymmetric Corrugated Microchannels [Volume 179, Issue 0, 2023, Pages 43-67]
  • Saber, Fathy Numerical investigation of particle spray size distribution in turbulent jet flow [Volume 174, Issue 0, 2022, Pages 262-284]
  • Saber, Ibrahim Development of QPSK Demodulator using DSP Techniques [Volume 163, Issue 0, 2019, Pages 1-14]
  • Saber, Ibrahim Experimental Investigation of Low GWP Refrigerants Applied to Split Air Conditioner [Volume 162, Issue 0, 2019, Pages 51-67]
  • Saber, Nermin On The Studying of Contact Mechanics of a Flat Stamp Graded Coatings Using An Advanced Barycentric Lagrange Interpolation Formula [Volume 175, Issue 0, 2022, Pages 37-45]
  • Sabry, Hanan DOUBLE-SKIN FACADES IN HEALING ENVIRONMENTS: AN APPROACH FOR ENHANCING DAYLIGHTING PERFORMANCE IN SOUTH-ORIENTED PATIENT ROOMS IN CAIRO, EGYPT [Volume 165, Issue 0, 2020, Pages 96-113]
  • Sadek, Hatem Numerical Investigation of Smoke Extraction Methods in Large Storage Areas: Design Modifications [Volume 169, Issue 0, 2021, Pages 235-265]
  • Sadek, Hatem Buildings Energy Prediction Using Artificial Neural Networks [Volume 171, Issue 0, 2021, Pages 106-118]
  • Sadek, Hatem An Investigation of the Factors Affecting the Mechanical Smoke Extraction System for A Building with an Atrium [Volume 177, Issue 0, 2023, Pages 130-144]
  • Sadek Hosny, Samir A Biophilic Approach for Optimizing Daylighting Performance and Views-Out in Intensive Care Units Using Combined Light Shelf. [Volume 165, Issue 0, 2020, Pages 57-77]
  • Sadek Hosny, Samir The Effect of Night Ventilation on Covered Sports Halls Energy Conservation [Volume 176, Issue 0, 2022, Pages 185-196]
  • Said, Muhamad Impact of the jet velocity on the turbulent liquid jet [Volume 179, Issue 0, 2023, Pages 249-273]
  • Said Muhammadi Abdulqadir, Lameess Analytical Study to Monitor and Document the Impact of Globalization on the Emergence of Food Architecture and Its Spread As An Entertainment Architecture In The City of Onaizah, Qassim Region, Saudi Arabia." [Volume 181, Issue 0, 2024, Pages 52-75]
  • Saied Abd El- Hay Ghoname, Marmar Contextual Design for New Additions in Historical Complexes (Cairo University Campus) [Volume 176, Issue 0, 2022, Pages 220-247]
  • Saif EL-Nasr, Mohammed VISION OF THE IDEAL PRISON DESIGN ACCORDING TO THE HUMAN RIGHTS CONSIDERATIONS [Volume 166, Issue 0, 2020, Pages 66-82]
  • Saif EL-Nasr, Mohammed ANALYTICAL STUDY FOR THE PRISON DESIGN IN EGYPT ACCORDING TO HUMAN RIGHTS ORGANIZATION CONSIDERATIONS [Volume 166, Issue 0, 2020, Pages 83-104]
  • Sakr, Khaled Effect of Using Local Hematite aggregate on concrete mechanical properties and Radiation Shielding [Volume 176, Issue 0, 2022, Pages 110-123]
  • Salah Bakry, Mohamed Effect of Radiant Surface Combined with Displacement Ventilation in Office Building in Egypt [Volume 177, Issue 0, 2023, Pages 231-254]
  • Salah Eldeen, Zeinab Development of Sustainable Asphalt Pavement Mixture Using Recycled concrete aggregate, Crumb Rubber and Waste Engine Oil [Volume 180, Issue 0, 2023, Pages 39-58]
  • Salah Gharib, Mohamed Restoration and Development of Urban Heritage Sites (Rehabilitation of Middle cities and Heritage towns) [Volume 167, Issue 0, 2020, Pages 52-74]
  • Salah Gharib, Mohamed The Future of Architectural Education in Egypt " Architecture Pedagogy Focuses on Educational Concepts and Approaches" [Volume 171, Issue 0, 2021, Pages 301-313]
  • Salah Gharib, Mohamed Inclusion of Sustainability Concepts in Architectural Education The Current and Expected Situation in Egypt [Volume 175, Issue 0, 2022, Pages 336-351]
  • Salama, Enass Improve Implementing Mega Building Envelope upon arriving material using lean six sigma: case study [Volume 169, Issue 0, 2021, Pages 30-50]
  • Salama, Enass Analytical study of the causes of material waste in implementing the construction envelopes in Egypt [Volume 169, Issue 0, 2021, Pages 51-65]
  • Salama, Nermen FPGA BASED BEVEL GEARBOX FAULT DIAGNOSIS APPROACH [Volume 160, Issue 0, 2018, Pages 59-78]
  • Saleh Abd Elfatah, Ahmed 3D Printing in Architecture, Engineering and Construction (Concrete 3D printing) [Volume 162, Issue 0, 2019, Pages 119-137]
  • Sami Abd Elrahman Mohamed Mostafa, Ahmed THE FEASABILITY OF LAND READJUSTMENT FOR INFORMAL AREAS’ UPGRADING STRATEGIES IN EGYPT. [Volume 163, Issue 0, 2019, Pages 106-129]
  • Samir, Ahmed Numerical Investigation of Smoke Extraction Methods in Large Storage Areas: Design Modifications [Volume 169, Issue 0, 2021, Pages 235-265]
  • Samir A. Shawkat, Marwa Improving Energy Efficiency performance utilizing building envelope design in High standard housing in Egypt [Volume 171, Issue 0, 2021, Pages 330-351]
  • Samy Abdeen, Nisreen THE INFLUENCE OF ARCHITECTURAL HISTORY IN FINDING OUR EGYPTIAN IDENTITY AS A LANDMARK. [Volume 167, Issue 0, 2020, Pages 327-344]
  • Samy Abdeen, Nisreen ANALYTICAL METHODOLOGY FOR REGENERATING URBAN IDENTITY AS A SUSTAINABLE CULTURAL HERITAGE LANDMARK IN EGYPT, CASE STUDY: EGYPTIAN MUSEUM(GEM) [Volume 169, Issue 0, 2021, Pages 66-91]
  • Samy Ahmed Abdeen, Nisreen INTEGRATION OF SUSTAINABILITY STRATEGIES IN ARCHITECTURAL EDUCATION TOWARDS THE ACHIEVEMENT OF THE COMPREHENSIVE QUALITY CONTROL [Volume 167, Issue 0, 2020, Pages 305-326]
  • S. Askar, Hamed Punching Shear Behavior of Interior Slab-Column Connections Reinforced with Vertical Bolts [Volume 162, Issue 0, 2019, Pages 15-31]
  • Sayed, Abd El-Azim PERFORMANCE OF COUPLING BEAMS WITH OPENINGS EXPOSED TO CYCLIC LOADING [Volume 168, Issue 0, 2020, Pages 191-210]
  • Sayed, Abd-ellatif A Novel Protection Algorithm for Medium Voltage Collector Feeder In Wind Farm Based On Quadrature Directional Algorithm With Laboratory Investigation [Volume 165, Issue 0, 2020, Pages 14-32]
  • Sayed, Hussien Fault diagnosis of rolling element bearing based on the empirical wavelet transform technique and correlation coefficient [Volume 180, Issue 0, 2023, Pages 147-160]
  • Sedhom Gad, Sami اشکالیة تدقیق البرنامج الزمنی لمشروعات ترمیم وصیانة المبانی األثریة [Volume 175, Issue 0, 2022, Pages 113-124]
  • Sedhom Gad, Sami محاولة صياغة منهاجية لتقييم جودة إعادة تصميم وتخطيط محاور المناطق التاريخية دراسة حالة: محور شارع الحجاز – منطقة الميرلاند – حي مصر الجديدة Attempting formulation to assess the quality of redesign and planning of historic areas Case study: Al Hijaz Axis-Maryland area-Heliopolis district [Volume 180, Issue 0, 2023, Pages 75-90]
  • Sedrak, M. Numerical Study for Enhancement of Concentrator Photovoltaic (CPV) Cells Efficiency [Volume 163, Issue 0, 2019, Pages 309-342]
  • Sedrak, M. Numerical Study for Concentrated Photovoltaic Performance at Low Concentration Ratio [Volume 163, Issue 0, 2019, Pages 343-366]
  • Sedrak, M. Improving the cooling performance of a data center: impact of unit arrangement and CFD setups [Volume 168, Issue 0, 2020, Pages 117-145]
  • Sedrak, Momtaz Simulation-Based Optimization of Smart Building Energy Using Artificial Neural Network [Volume 165, Issue 0, 2020, Pages 210-231]
  • Sedrak, Momtaz Numerical investigation of particle spray size distribution in turbulent jet flow [Volume 174, Issue 0, 2022, Pages 262-284]
  • Sedrak, Momtaz Impact of the jet velocity on the turbulent liquid jet [Volume 179, Issue 0, 2023, Pages 249-273]
  • S. El Touny, A. CONSTRUCTION PROJECTS’ CLASSIFIED PERFORMANCE INDICATORS (CPIs) [Volume 171, Issue 0, 2021, Pages 179-198]
  • Serwa, Ahmed Studying the potentiality of using low cost system based on image analysis technique to survey the gravel’s size in asphalt mixes [Volume 167, Issue 0, 2020, Pages 257-274]
  • Serwa, Ahmed Geomorphological hazard analysis using dem along the Eastern coast between Marsa Alam and Ras Gharib, Egypt. [Volume 174, Issue 0, 2022, Pages 1-21]
  • S. Gab Allah, Ail Effective Home Automation Using Android and Embedded System [Volume 166, Issue 0, 2020, Pages 1-14]
  • S. Gab Allah, Ail Low-Cost Design and Implementation of Cloud SCADA System [Volume 166, Issue 0, 2020, Pages 15-29]
  • Shaaban, S Performance of solar dish Stirling engine systems under Egyptian operating conditions [Volume 160, Issue 0, 2018, Pages 79-104]
  • Shaaban, S. Performance Enhancement of an Integrated Solar Combined Cycle with Multi-Stage Flash Desalination Cycle as Bottoming Cycle [Volume 165, Issue 0, 2020, Pages 232-250]
  • Shaaban, S. On the use of the NACA0021 and the S1046 blade profiles with a hydro Darrieus turbine under the typical operating conditions of the Nile River [Volume 160, Issue 0, 2018, Pages 44-58]
  • Shabaan, S. An improved desiccant evaporative cooling system, parametric analysis, and system comparison [Volume 166, Issue 0, 2020, Pages 366-388]
  • Shabaan, S. Optimization of Heat Source Temperature for Single and Double Effect Vapor Absorption Refrigeration System [Volume 162, Issue 0, 2019, Pages 68-85]
  • Shabana, Yasser CFD STUDY OF THE EFFECT OF ADDITIONAL INNER BLADES ON SAVONIUS ROTOR PERFORMANCE [Volume 167, Issue 0, 2020, Pages 293-304]
  • Shahein, Mahmoud Combustion Characteristics of Coal-Oil-Water Slurry in Furnaces [Volume 160, Issue 0, 2018, Pages 120-138]
  • Shaker H. Askar, Hamed Strength Characteristics Of Lightweight Reinforced Concrete Deep Beams With Web Openings [Volume 166, Issue 0, 2020, Pages 262-283]
  • Shalaby, Heidi The History of Efforts to save the New Gourna for Hassan Fathy towards the Restoration Project 2021 [Volume 173, Issue 0, 2022, Pages 276-298]
  • S. Hamouda, M. A study on Cavitation erosion and its effect on metals [Volume 167, Issue 0, 2020, Pages 345-355]
  • Shehab, Maisoon Development of QPSK Demodulator using DSP Techniques [Volume 163, Issue 0, 2019, Pages 1-14]
  • Sheta, Sherif تطبيقات کفاءة المياه للعمارة و العمران في نظم التقييم البيئي العالمية والمحلية Water Efficiency Applications for Architecture and Urbanism in International and Local Environmental Assessment Systems [Volume 164, Issue 0, 2019, Pages 49-67]
  • Shoeib, Ata El-Kareim Behavior of Prestressed Concrete Beams in the Presence of Opening Before and After Tensioning of Cables [Volume 178, Issue 0, 2023, Pages 1-16]
  • Shoeib Soliman, Ata El Karim MECHANICAL BEHAVIOUR OF CONCRETE PRISMS STRENGTHENED BY NANO GRAPHENE FIBERS [Volume 180, Issue 0, 2023, Pages 244-359]
  • Shoeib Soliman, Ata El Karim BEHAVIOUR OF MORTAR PRISMS STRENGTHENED BY NANO GRAPHENE FIBERS [Volume 181, Issue 0, 2024, Pages 90-105]
  • S. MAHMOUD, A. BEHAVIOUR OF PILES SUBJECTED TO LATERAL FORCES IN COHESIVE SOIL [Volume 171, Issue 0, 2021, Pages 260-268]
  • S. Mekheimer, Khaled. Investigating the Impact of Magnetic Fields and Pulsating Pressure on Non-Newtonian Fluid Flow in Symmetric/Asymmetric Corrugated Microchannels [Volume 179, Issue 0, 2023, Pages 43-67]
  • S. Mohamed Gamal, M. CFD Modelling of CH4/Air Flames Characteristics Issuing from a Two-Slot EV-Burner [Volume 176, Issue 0, 2022, Pages 171-184]
  • Sobhy, T. Space Syntax as a Tool to Enhance the Performance of El-Tahrir Complex Plaza تقنيات تحليل بنية الفراغ كآداه لتحسين أداء ساحة مجمع التحرير [Volume 175, Issue 0, 2022, Pages 262-279]
  • Sobhy Kandile, Yasmine The Use of Green Design Strategies for Achieving Thermal Comfort (Applying PMV as a Measurement Tool) [Volume 171, Issue 0, 2021, Pages 35-46]
  • S. Ouf, Mohamed. Comparing the Accuracy of Image Processing Softwares and Conventional Method for Pavement Distresses Measurement [Volume 180, Issue 0, 2023, Pages 405-422]
  • S Qattan, Wajdy تحسين البيئة الداخلية وجودة الأداء البيئي للمباني السکنية بمدينة مکة المکرمة من خلال تقييم کفاءة الواجهات المتحرکة [Volume 173, Issue 0, 2022, Pages 198-218]
  • S. Salman, W. Rotary Machines Fault Diagnosis based on Principal Component Analysis [Volume 171, Issue 0, 2021, Pages 138-150]
  • S. Shoukralla, E. On The Studying of Contact Mechanics of a Flat Stamp Graded Coatings Using An Advanced Barycentric Lagrange Interpolation Formula [Volume 175, Issue 0, 2022, Pages 37-45]
  • Suliman Eissa Mohammed, Hanan Blockchain Technology and the Future of Construction Industry in the Arab region :Applications, Challenges, and Future Opportunities [Volume 173, Issue 0, 2022, Pages 411-441]
  • Swelam, Mostafa Acoustic diagnosis of cavitation for centrifugal pumps of different materials. [Volume 164, Issue 0, 2019, Pages 214-228]

T

  • Taha Abulkasem, Mahmoud Development of Drainage and water supply systems to reduce water consumption in Residential Buildings in Egypt [Volume 170, Issue 0, 2021, Pages 47-62]
  • Taha Abulkasem, Mahmoud Building Demolition Waste in Achieving a Sustainable Vernacular Building With a New Architectural Style in Egypt’s New Cities [Volume 174, Issue 0, 2022, Pages 244-261]
  • Taha Mahmoud, Mahmoud أداة رصد وتحليل التغيرات في األنشطة التي تحدث داخل الفراغ العمراني [Volume 161, Issue 0, 2019, Pages 176-189]
  • Tahoun, Ahmed Improvement of Regenerative Pump Performance by Using Blade with Combined Angles Modification [Volume 174, Issue 0, 2022, Pages 172-190]
  • Talaat, Yasmin A conceptual framework on applying BAPV systems to existing educational buildings Case Study: The Higher Institute of Engineering and Technology-Fifth Settlement [Volume 174, Issue 0, 2022, Pages 191-207]
  • Talaat, Yasmin Enhancing Walkability in pedestrian oriented gated communities Case Study: Arabia’s Gated Community-New Cairo City [Volume 175, Issue 0, 2022, Pages 73-95]
  • Talaat Ismail, Yasmin تقییم دور عناصر تنسیق الشارع في الوصول إلي رضا المستخدمین لتحسین جودة الشوارع الحیویة Assessing the role of streetscape elements to satisfy users through improving livable streets quality [Volume 177, Issue 0, 2023, Pages 416-435]
  • Tarek Abdelraouf Esmael, Nada A Biophilic Approach for Optimizing Daylighting Performance and Views-Out in Intensive Care Units Using Combined Light Shelf. [Volume 165, Issue 0, 2020, Pages 57-77]
  • Tawfik, Toka Identifying Retrofit Technology to Improve Building Energy Performance: A Review [Volume 178, Issue 0, 2023, Pages 174-200]
  • Tawfik Mohamed, Nada Assessing The Impact of Stakeholders’ Interaction on The Efficiency of Managing Risk in Construction Projects A Literature Review [Volume 173, Issue 0, 2022, Pages 299-315]
  • Tawfik Mohamed, Sara A Critical Review of Quality Assessment Tools for Public Spaces [Volume 177, Issue 0, 2023, Pages 255-274]
  • Tawfik Mohamed, Sara Improving Quality of Student’s Life on University Campus (Guidelines of New Assessment Tools) [Volume 178, Issue 0, 2023, Pages 429-445]
  • Thomas, Jean INC-MPPT Algorithm for Maximizing Energy Conversion Efficiency of Thermoelectric Generating System [Volume 162, Issue 0, 2019, Pages 102-118]
  • T. Omar, Ali The Khedivial Cairo Revitalization Project A case study from Kaser El-Nail Street [Volume 174, Issue 0, 2022, Pages 62-82]
  • T.Saleh, M. THE PHILOSOPHY OF PARADIGM SHIFT ACROSS THE HISTORY OF ARCHITECTURAL PRACTICES [Volume 172, Issue 0, 2021, Pages 190-211]

W

  • Wagih A. ElHalim, Dalia LANDSCAPE AS AN APPROACH FOR DEVELOPMENT AROUND RIVERS [Volume 167, Issue 0, 2020, Pages 75-89]
  • Wahed, Mazen Impact of geometric parameters and inlet boundary conditions on the behavior of a cyclone separator [Volume 175, Issue 0, 2022, Pages 96-112]
  • Walid Yehia AbdelHAdy El-Eshmawy, Aya Conventional and Advanced Glazing Technologies for Enhancing Thermal and Lighting Performance [Volume 171, Issue 0, 2021, Pages 1-15]

Y

  • YAHYA, MOHAMED ENGTHENING OF EXISTING STEEL BEAMS USING CFRP [Volume 169, Issue 0, 2021, Pages 159-172]
  • Y. Ali, W. Friction and Wear Characteristics of Polymeric Composites Reinforced by Nano Particles and Impregnated with Paraffin Oil [Volume 161, Issue 0, 2019, Pages 1-17]
  • Yasser Shokry, Shokry A Methodological Framework for Enhancing the Modern Office Spaces and Solving their Problems [Volume 177, Issue 0, 2023, Pages 79-102]
  • Y, El Kerdany, Dalila, New Urbanism Theory as an Approach to regenerate the Egyptian Urban Heritage [Volume 161, Issue 0, 2019, Pages 112-133]
  • Y, El-Kerdany, Dalila, General Theory of Walkability as criteria for regenerating Maadi as a walkable neighborhood [Volume 162, Issue 0, 2019, Pages 182-198]
  • Y. M. Hashem, Asmaa Effective Home Automation Using Android and Embedded System [Volume 166, Issue 0, 2020, Pages 1-14]
  • Y. M. Hashem, Mohamed Low-Cost Design and Implementation of Cloud SCADA System [Volume 166, Issue 0, 2020, Pages 15-29]
  • Yousef, Magdy Behavior of Steel Fiber Concrete Beams with Different Reinforcement Method Around Opening [Volume 179, Issue 0, 2023, Pages 13-24]
  • Yousef, Magdy Effect of Mineral Admixtures and Recycled Concrete on Concrete Compressive Strength [Volume 179, Issue 0, 2023, Pages 25-42]
  • Youssef, Ismail Effect of n-butanol/diesel blends on performance, emission, noise and vibration characteristics of a diesel engine generator [Volume 163, Issue 0, 2019, Pages 203-217]
  • Y. Sakrb, R. Y. Sakrb Heat Transfer From Elliptic Cylinder Immersed In A Fluidized Bed [Volume 166, Issue 0, 2020, Pages 389-405]
  • Y. Sayed, A. Solution of a class of nonlinear differential equations using an accelerated version of Adomian decomposition method [Volume 167, Issue 0, 2020, Pages 15-33]
  • Y. Sayed, Ahmed Shape Recognition Using V4 Dominant Conical Meshes [Volume 167, Issue 0, 2020, Pages 1-14]
  • Y. Sayed, Ahmed Capillary Gravitational Stability of Streaming Fluid Jet Pervaded by Oblique Varying Magnetic Field [Volume 172, Issue 0, 2021, Pages 171-189]
  • Y. Sayed, Ahmed On The Studying of Contact Mechanics of a Flat Stamp Graded Coatings Using An Advanced Barycentric Lagrange Interpolation Formula [Volume 175, Issue 0, 2022, Pages 37-45]
  • Y. Sayed, Ahmed Using An accelerated Technique of The Laplace-Adomian Decomposition Method in Solving A class of Non-linear Integro-differential Equations [Volume 175, Issue 0, 2022, Pages 371-385]
  • Y. Sayed, Ahmed Optimization of passive transit signal priority for El-Raml tram, Alexandria, Egypt [Volume 177, Issue 0, 2023, Pages 1-16]
  • Y. Sayed, Ahmed Investigating the Impact of Magnetic Fields and Pulsating Pressure on Non-Newtonian Fluid Flow in Symmetric/Asymmetric Corrugated Microchannels [Volume 179, Issue 0, 2023, Pages 43-67]
  • Y, Shafik, Zeinab, New Urbanism Theory as an Approach to regenerate the Egyptian Urban Heritage [Volume 161, Issue 0, 2019, Pages 112-133]
  • Y, Shafik, Zeinab, General Theory of Walkability as criteria for regenerating Maadi as a walkable neighborhood [Volume 162, Issue 0, 2019, Pages 182-198]

Z

  • Zafan, H. Experimental Study for Enhancement the Cooling System and Exhaust Gasses for Gasoline Automotive Engine Using Nano-Fluid. [Volume 161, Issue 0, 2019, Pages 96-111]
  • Zaher, A. An improved desiccant evaporative cooling system, parametric analysis, and system comparison [Volume 166, Issue 0, 2020, Pages 366-388]
  • Zein, Samir FLASH FLOOD MANAGEMENT IN ARID REGION: A CASE STUDY URBAN BANI WASIL VILLAGE, SOHAG GOVERNORATE [Volume 169, Issue 0, 2021, Pages 130-146]
  • Zenhom Haddad, Hassan CFD STUDY OF THE EFFECT OF ADDITIONAL INNER BLADES ON SAVONIUS ROTOR PERFORMANCE [Volume 167, Issue 0, 2020, Pages 293-304]
  • Z. Hassan, Nasr. Effect of Different Reinforced Type on RC Beams [Volume 167, Issue 0, 2020, Pages 244-256]
  • Zidan, Nehad Impact of geometric parameters and inlet boundary conditions on the behavior of a cyclone separator [Volume 175, Issue 0, 2022, Pages 96-112]
  • Zidan, Nehad Optimization of an Environmentally Sustainable HTL-Free Perovskite Solar Cell using SCAPS-1D [Volume 179, Issue 0, 2023, Pages 116-132]
  • Z. Salim, M. Free vibration analysis for a pipe conveying fluid with intermediate support and carrying multiple concentrated masses [Volume 160, Issue 0, 2018, Pages 26-43]